Posted in Tools & Home Improvement

Bosch 4-in-1 Digital Angle Finder GAM 220 MF

#ad
#ad
Bosch GAM 220 MF #ad - Includes: 1 digital angle finder; 1 Leg Extension; 1 Hard Thermoformed Case; 4 AA 1. 5-volt batteries versatility: the bosch gam 220 mf provides four tools in one including an angle finder, miter calculator, protractor and level. Memory: this angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite.

Display: easy-to-read illuminated, rotating flip display. The simple miter cut calculation has an input range of 0-220°, and it includes a compound cut calculator. The flip display is illuminated and rotating, making it easy to read. It has clearly labeled buttons for straightforward calculations. The tool has robust housing with IP 54 protection.

Bosch 4-in-1 Digital Angle Finder GAM 220 MF #ad - This angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite. Leg extension, hard thermoformed case, 4 AA 1. 5v batteries. It’s a perfect tool for carpenters, remodelers and contractors. The bosch gam 220 mf digital angle finder is four tools in one: an angle finder, a cut calculator, a protractor and a level.

The miter cut calculation has an input measurement from 0-220 degrees.

More information about Bosch GAM 220 MF #ad

Bosch 5-in-1 Digital Angle Finder and Inclinometer GAM 270 MFL

#ad
#ad
Bosch GAM 270 MFL #ad - Bosch 5-in-1 digital angle finder and inclinometer gam 270 mfL Versatility: the bosch gam 270 mfl provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level. Memory: this angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite.

Bosch 5-in-1 Digital Angle Finder and Inclinometer GAM 270 MFL #ad - Display: easy-to-read illuminated, rotating flip display for the inclinometer and angle finder. The miter cut calculation has an input measurement from 0-270 degrees. Durable: features robust housing with IP54 protection, making the angle finder water and dust resistant. Compelte: the bosch gam 270 mfl includes a 5-in-1 digital angle finder, hard thermoformed case, 24 in.

. Leg extension, 4 AA 1. 5v batteries.

More information about Bosch GAM 270 MFL #ad


Similar products



Jackson Safety Curv O Mark Centering Head Pipe Marker 14775, Standard #6

#ad
#ad
Kimberly-Clark Professional 14775 #ad - The miter cut calculation has an input measurement from 0-270 degrees. Durable: features robust housing with IP54 protection, making the angle finder water and dust resistant. Compelte: the bosch gam 270 mfl includes a 5-in-1 digital angle finder, hard thermoformed case, 24 in. Leg extension, 4 AA 1. 5v batteries.

You don't have time to fool with unreliable tools. The curvomark center finder has a 4 inch Y-type head fitted with an adjustable dial bubble protractor DSL. It features a y-type head and is fitted with an adjustable dial bubble protractor DSL and a manually operated hardened centering pin you'll need a small hammer or mallet to tap the pin mark into the pipe.

Jackson Safety Curv O Mark Centering Head Pipe Marker 14775, Standard #6 #ad - . Use this manually operated Jackson Safety hardened centering pin with a small hammer or mallet to tap the pin in for effective pipe marking. That's why the curv o mark centering Head Pipe Marker Standard is a must-have on your list of pipe welding tools. Since it's a manual pipe centering head, it virtually eliminates the potential for equipment malfunction.

Versatility: the bosch gam 270 mfl provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level. Memory: this angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite. Display: easy-to-read illuminated, rotating flip display for the inclinometer and angle finder.

More information about Kimberly-Clark Professional 14775 #ad


Similar products



Sumner Manufacturing 781235 Qwik Pins, Carbon Flange Pins, 5/8" - 1-5/8", Sold per Pair

#ad
#ad
Sumner Manufacturing SUM 781235 #ad - Automatically center on 5/8" to 1-5/8" 16 to 42 mm holes. The curvomark center finder has a 4 inch Y-type head fitted with an adjustable dial bubble protractor DSL. Use this manually operated Jackson Safety hardened centering pin with a small hammer or mallet to tap the pin in for effective pipe marking. Qwik pins simple operation: 1 push the spring-loaded button 2 Separate pin from nut 3 Insert into top two flange holes 4 Push spring button and reinsert onto pin 5Quarter turn to tighten.

Work as convenient reference points to level flange for tack and weld-out. The miter cut calculation has an input measurement from 0-270 degrees. Durable: features robust housing with IP54 protection, making the angle finder water and dust resistant. Compelte: the bosch gam 270 mfl includes a 5-in-1 digital angle finder, hard thermoformed case, 24 in.

Sumner Manufacturing 781235 Qwik Pins, Carbon Flange Pins, 5/8" - 1-5/8", Sold per Pair #ad - This pipe centering tool helps with setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. Standard #6 model may be used on pipe 1/2 in diameter and larger; use it for pipes and tanks. Leg extension, 4 AA 1. 5v batteries.

You don't have time to fool with unreliable tools. Versatility: the bosch gam 270 mfl provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level.

More information about Sumner Manufacturing SUM 781235 #ad


Similar products



Collins Tool Company Coping Foot

#ad
#ad
Collins Tool #ad - Work as convenient reference points to level flange for tack and weld-out. The coping foot is a dome shape base for the jig saw that allows you to bevel, turn and pitch the blade while changing any of those angles during the cut. You can saw very close to other obstacles. Finish carpenters use the jig saw mostly for back beveling irregular lines, and so the Coping Foot becomes the ideal base for the jig saw.

. Automatically center on 5/8" to 1-5/8" 16 to 42 mm holes. Plated steel. Do a sink cutout up against a back splash for instance or cut a bottom plate next to a stud. Youll wear out a couple of jig saws before you wear out your Coping Foot. Fits most jig saws except for Porter-Cable, and the Bosch 1590 and 1591.

Collins Tool Company Coping Foot #ad - Making a twisting cut such as you would find in a spiral handrail is a skill easy to learn with a coping foot. This pipe centering tool helps with setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. Standard #6 model may be used on pipe 1/2 in diameter and larger; use it for pipes and tanks.

The curvomark center finder has a 4 inch Y-type head fitted with an adjustable dial bubble protractor DSL. Use this manually operated Jackson Safety hardened centering pin with a small hammer or mallet to tap the pin in for effective pipe marking.

More information about Collins Tool #ad


Similar products



Proudly Made in the USA - Collins Miter Spring Pliers and 4 Miter Clamp Kit

#ad
#ad
Collins Tool Company #ad - This pipe centering tool helps with setting center lines, locating points inside pipes and tanks, establishing angles and marks for butt-ins, laying out keyways and measuring declivity. Standard #6 model may be used on pipe 1/2 in diameter and larger; use it for pipes and tanks. Plated steel. Work as convenient reference points to level flange for tack and weld-out.

Whether you are applying moldings and trim or whipping up a run of picture frames one of the biggest hassles in gluing up mitered corners is keeping them from opening up. Spring clamps are the quickest and easiest way to do it and the Collins Spring Clamp System is one of the most economical we've ever come across.

Proudly Made in the USA - Collins Miter Spring Pliers and 4 Miter Clamp Kit #ad - The clamps spread up to approximately 2, so they will cover most trim sizes and any compound miter. Pliers and 4 spring miter clamps included. Acme threads for maximum clamping power and hardened steel for long lasting use. Turns your jigsaw into a simple and accurate coping machine without the need for jigs and templates.

Automatically center on 5/8" to 1-5/8" 16 to 42 mm holes. Sharp point pierces the wood without cutting wood fibers vs the competitions angled cut. Youll wear out a couple of jig saws before you wear out your Coping Foot.

More information about Collins Tool Company #ad


Similar products



DEWALT DW7084 Crown Stops for DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718

#ad
#ad
Dewalt DW7084 #ad - Measures 6-1/2-x-4-1/2 inches. Work as convenient reference points to level flange for tack and weld-out. Tough, steel construction. Great for picture frames, moldings, trim work and any compound miter. Automatically center on 5/8" to 1-5/8" 16 to 42 mm holes. Turns your jigsaw into a simple and accurate coping machine without the need for jigs and templates.

Includes 2 stops, one for each side of the blade. Acme threads for maximum clamping power and hardened steel for long lasting use. Includes: 2 stops, one for each side of blade. Designed to work with dewalt models dw703, dw708, dw715, dw706, dw716, dw712, DW717 and DW718. Keeps any mitered corner from opening up while glue dries for the perfect finish.

DEWALT DW7084 Crown Stops for DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718 #ad - The miter cut calculation has an input measurement from 0-270 degrees. Durable: features robust housing with IP54 protection, making the angle finder water and dust resistant. Compelte: the bosch gam 270 mfl includes a 5-in-1 digital angle finder, hard thermoformed case, 24 in. Versatility: the bosch gam 270 mfl provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level.

Memory: this angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite. Display: easy-to-read illuminated, rotating flip display for the inclinometer and angle finder.

More information about Dewalt DW7084 #ad


Similar products



FastCap Accuscribe Scribing Tool

#ad
#ad
Fastcap ACCUSCRIBE #ad - Includes 1 scribe and 1 pencil. Keeps any mitered corner from opening up while glue dries for the perfect finish. Automatically center on 5/8" to 1-5/8" 16 to 42 mm holes. Durable polymer construction. That's why the curv o mark centering Head Pipe Marker Standard is a must-have on your list of pipe welding tools.

Includes 2 stops, one for each side of the blade. Tough, steel construction. Plated steel. This pipe centering tool helps with setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. Standard #6 model may be used on pipe 1/2 in diameter and larger; use it for pipes and tanks.

FastCap Accuscribe Scribing Tool #ad - Accurately positions crown molding vertically against the saw fence. Pliers and 4 spring miter clamps included. Leg extension, 4 AA 1. 5v batteries. You don't have time to fool with unreliable tools. Measures 6-1/2-x-4-1/2 inches. Youll wear out a couple of jig saws before you wear out your Coping Foot. Fits most jig saws except for Porter-Cable, and the Bosch 1590 and 1591.

More information about Fastcap ACCUSCRIBE #ad


Similar products



Bosch Digital Multi-Scanner GMS120

#ad
#ad
Bosch GMS 120 #ad - The gms120 offers automatic calibration from the start and continues to self-calibrate through the course of the project for easy and precise detection. Accurately positions crown molding vertically against the saw fence. Designed to work with dewalt models dw703, dw716, dw712, dw706, DW715, DW708, DW717 and DW718.

Scribing tool with adjustable grip for standard pencils. The curvomark center finder has a 4 inch Y-type head fitted with an adjustable dial bubble protractor DSL. Plated steel. Keeps any mitered corner from opening up while glue dries for the perfect finish. Know what's behind the wall before you take on that job with a wall scanner! The Bosch GMS 120 Electronic Multi Scanner finds magnetic and nonmagnetic metals, power cables, wooden substructures and even plastic pipes! An audible alert and illuminated graphical display gives you the information you need to proceed with confidence.

Bosch Digital Multi-Scanner GMS120 #ad - The coping foot is formed from 14 ga. Durable polymer construction. Use this manually operated Jackson Safety hardened centering pin with a small hammer or mallet to tap the pin in for effective pipe marking. Turns your jigsaw into a simple and accurate coping machine without the need for jigs and templates.

Display: features an illuminated graphical lcd display to indicate mode, and more. Miter clamps spread from 0 to approximately 2 inches.

More information about Bosch GMS 120 #ad


Similar products



CH Hanson 3 ft. x 4 ft. x 5 ft. 90 degree Aluminum Folding Layout Asquare

#ad
#ad
CH Hanson 345EK #ad - Pliers and 4 spring miter clamps included. No need to carry a bunch of different sizes. Valuable tool for anyone involved in carpentry, masonry, framing timber, angle layout, squaring, layout, pavers and much more. Only true 3' x 4' x 5' square, providing an accurate measurement with every use. Measures 6-1/2-x-4-1/2 inches.

Sharp point pierces the wood without cutting wood fibers vs the competitions angled cut. The accuracy of the product is 00625. Self-calibrating: includes three selection modes for wood, metal, and AC wiring. Work as convenient reference points to level flange for tack and weld-out. The large detection ring flashes green for no object found, detection strength, orange for object near and red for object found within the sensor range.

CH Hanson 3 ft. x 4 ft. x 5 ft. 90 degree Aluminum Folding Layout Asquare #ad - Center finder: this wall scanner includes a center finder that pinpoints the object center with an audible detection signal with an on/off button. Triangle is big enough to complete a job, and makes storage easy with collapsable feature. Miter clamps spread from 0 to approximately 2 inches. Turns your jigsaw into a simple and accurate coping machine without the need for jigs and templates.

Easily maintain consistent scribe offset, keeping parallel to surface every time. The ch hanson 3 ft.

More information about CH Hanson 345EK #ad


Similar products



HAMMERHEAD HLLT16 16'' Digital Angle Finder with Dual LCD Screen, Multi-Purpose Protractor Level Tool with Leg Extension

#ad
#ad
HAMMERHEAD HLLT16 #ad - Leg extension, 4 AA 1. 5v batteries. You don't have time to fool with unreliable tools. Plated steel. You can press hold function to freeze the measurement on display before transformation and Note. Youll wear out a couple of jig saws before you wear out your Coping Foot. Fits most jig saws except for Porter-Cable, and the Bosch 1590 and 1591.

Detection: the bosch gms120 digital wall Scanner features multi-mode laser detection for wood studs, metal objects rebar, studs and steel/copper pipes and live wiring. Performance: features the latest three sensor laser technology, offering a wide range of detection performance of up to 4-3/4-Inch deep in cured concrete, up to 2 inches for live wiring, up to 3-1/8 inches for copper and up to 1-1/2 inches for wood studs.

HAMMERHEAD HLLT16 16'' Digital Angle Finder with Dual LCD Screen, Multi-Purpose Protractor Level Tool with Leg Extension #ad - The curvomark center finder has a 4 inch Y-type head fitted with an adjustable dial bubble protractor DSL. Makes perfect right angles, good for general layouts. Durable polymer construction. Easy-to-read with hold function and dual backlit rotating flip display. Includes 1 scribe and 1 pencil. Three in one: digital angle finder, calculation for miter saw setting and vial level.

The large detection ring flashes green for no object found, detection strength, orange for object near and red for object found within the sensor range. Center finder: this wall scanner includes a center finder that pinpoints the object center with an audible detection signal with an on/off button.

More information about HAMMERHEAD HLLT16 #ad


Similar products