Posted in Uncategorized

Top 10 Nucleus-Nano Hand Wheel 15mm Rod Adapter – Camera Lens Rapid-Focusing Levers

As an Amazon Associate I earn from qualifying purchases.

1. Tilta

#ad

Tilta Nucleus-Nano Hand Wheel 15mm Rod Adapter

#ad
Tilta #ad - Tilta nucleus-nano hand wheel 15mm Rod Adapter - Tightening Toggle - Tilta 2 Year Limited Warranty. Materials: Aluminum-alloy, stainless steel. Weight: 0168 lbs 008kg. Compatibility: Nucleus-Nano Hand Wheel.
BrandTilta #ad
ManufacturerTilta #ad
Height2.6 Inches
Length4.1 Inches
Weight0.25 Pounds
Width3.5 Inches
Part NumberWLC-T04-HWC-15
ModelAdapter

2. SMALLRIG

#ad

SmallRig Nucleus-Nano Quick Release Mounting Clamp for Tilta Nucleus-Nano Hand Wheel – FAQ2323

#ad
SMALLRIG #ad - Quick release design Features a quick release lever and installation mark for installation in few seconds. Compatible with g2x gimbal Could used with gimbal with M6 screw not included.

More security the adapter is anti-off designed to prevent the handwheel from accidentally sliding off. Multi-functional equipped with 1/4", 3/8" and m4 screws, smallrig qr clamp could be used for ronin S via two m4 screws, for Zhiyun Crane2 via Mountng Clamp 2119, for Moza Air2 via Mounting plate 2319. Smallrig attachment plate 2323 is designed for helping nucleus-nato handwheel to attach on gimbals and any other camera equipment with 1/4”-20, 3/8”-16 and m4 threaded holes.
BrandSMALLRIG #ad
ManufacturerSmallRig #ad
Part NumberFAQ2323-SR-01

3. CAMVATE

#ad

CAMVATE 15mm Rod Clamp Cheeseplate Articulated Power Convert Outlet

#ad
CAMVATE #ad - Max work current: 10a in total, coiled spring cable can be stretched to max 80cm. A combination of a cheeseplate and a power convert outlet. Power converts from D-tap male to 4-port female. Works great for external monitor/on-camera light/wireless receiver; Compatible with Gold & V-mount camera battery. 15mm rod clamp at the end of the cheeseplate.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height0.7 Inches
Length7 Inches
Weight0.35 Pounds
Width5 Inches
Part NumberC1950-US
ModelHub Cable

4. Tilta

#ad

Mechanical Lens Control for DSLRs, Tilta FF-T06 Mini Follow Focus | Lightweight, Sony A7 A9 for Nikon GH5 BMPCC 4K 6K Cage | FF-T06

#ad
Tilta #ad - Precise focus via fluid dampening System and Marking Disc. Easy setup via any single 15mm Rod. Compatible with most lenses via 08mm pitch gear or Included Focus Gear Ring. A/b marks allow you to Set Hard Stops. Lightweight & compact weighing only 220g / 7. 7 oz.
BrandTilta #ad
ManufacturerTilta #ad
Height2.75 Inches
Length5.3 Inches
Weight1 Pounds
Width4 Inches
Part NumberFF-T06
ModelFF-T06
Warranty2 year mechanical

5. SMALLRIG

#ad

Ronin MX, SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Freefly MOVI, 1138

#ad
SMALLRIG #ad - It can mount monitor and led lights on the one end via 1/4’’ screw, and it can lock the rod on the cage via the clamp tightened by the locking knob. The best load < 1. 5kg. Smallrig multi-function double ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top. The rod clamp fits for dji ronin & freefly MOVI Pro & all 30mm rods and can also be adjusted with ease. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting.
BrandSMALLRIG #ad
ManufacturerSmallRig #ad
Height0.98 Inches
Length3.74 Inches
Weight0.44 Pounds
Width3.35 Inches
Part Number1138
Model1138

6. SMALLRIG

#ad

915, SMALLRIG Standard 15mm Micro Rod 1.5 Inches Long with 1/4" Male Female Thread for Clamp Mount

#ad
SMALLRIG #ad - It is often used in conjunction with a clamp Mount not included or CheesePlate not included. A 15 mm micro rod with 1. 5" total length 38 mm - comes with 1/4"-20 male thread on top, 1/4"-20 female thread at bottom. Stainless Steel Screw. 1/4"-20 male mount with locking wheel can tightly secure items such as external monitors, microphones, lighting and many other accessories. This 1. 5" rod can serve as 15 mm quick release mount for adapting anything that requires a male or female 1/4" 20 connection.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height0.39 Inches
Length1.97 Inches
Weight0.05 Pounds
Width0.39 Inches
Part Number1.5" 15mm Micro Rod
Model4332013904

7. SMALLRIG

#ad

SMALLRIG 15mm Rod Clamp Rail Connector Adapter with 1/4’’ Threads for DSLR Rig – 843

#ad
SMALLRIG #ad - Made of aluminum alloy, sturdy and durable. The spring ratchet wingnut is to tighten the rod and re-position in narrow spots where you’re not able to fully turn it. Compatible with standard 15mm rods, like smallrIG 15mm rod 1053 and SMALLRIG 15mm rod 1051. Lightweight, weighs only 40g. Features four 1/4’’-20 threaded holes, allowing you to attach the LCD monitor, LED light, articulating arm.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height1.38 Inches
Length1.57 Inches
Weight0.09 Pounds
Width0.79 Inches
Part NumberRodClamp01 - 4 thread
ModelGZFXPB0843

8. SMALLRIG

#ad

2061, SMALLRIG 15mm Railblock Rod Clamp with 1/4"-20 Thread for 15mm DSLR Camera Cage Shoulder Rig

#ad
SMALLRIG #ad - Smallrig super lightweight 15mm-Railblock 2061 includes 2pcs of super lightweight 15mm-Railblock. The adjustment of one wingnut will not affect the operation of the other wingnut. Each super lightweight 15mm-railblock-3 comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. In addition, it is equipped with an abundance of 1/4’’ threaded holes for DIY operations.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height1.57 Inches
Length4.33 Inches
Weight0.2 Pounds
Width0.39 Inches
Part Number2061-SR
Model4332011831

9. Tilta

#ad

Tiltamax Nucleus-Nano: Wireless Lens Control System — Wirelessly Control The Focus or Zoom of Most DSLR or Cine-Style Lenses | Compatible with Ronin S

#ad
Tilta #ad - The nucleus-nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions. Includes adapters for Ronin-S and Zhiyun Crane gimbals. The nucleus-nano uses a brand new state of the art power-efficient miniature motor. Fully compatible with Tilta's Nucleus-M motors & controllers + G2X gimbal. The nano motor features low noise and high torque.
BrandTilta #ad
ManufacturerTilta #ad
Height3.2 Inches
Length7.5 Inches
Weight1.6 Pounds
Width7.5 Inches
Part NumberWLC-T04
ModelWLC-T04

10. DRRI

#ad

DRRI D-tap to 4-Port Female Dtap P-Tap Hub Adapter Splitter for Anton Bauer V-Mount Battery/SmallHD Monitor

#ad
DRRI #ad - For anton bauer V-mount Battery. Cable Length: Approx. 60cm. Max work current: 10 amp max total. D-tap male connector to 4-port female connector. With this powertap receptacle, you can expand any Power Tap to accommodate up to four separate. With this 14. 8v hub is perfet for running a blackmagic production 4k, Monitor, Tilta handle and motor, multiple wireless systems, cameras, follow focus, on board light, on board recorderMovis/Ronins, etc.
BrandDRRI #ad
ManufacturerDRRI #ad
Part Number4348537030
Model1008175
Posted in Uncategorized

Top 9 C-Clamp Camera Mount – Camera Mounts & Clamps

As an Amazon Associate I earn from qualifying purchases.

1. PEDCO

#ad

PEDCO UltraClamp Assembly Camera Mount Accessory for Cameras, Scopes, and Binoculars 2.5-Inch

#ad
PEDCO #ad - Adjustable clamp and mount accessory for cameras, spotting scopes, binoculars and other optic devices. Durable aluminum clamp body and screw securely holds devices up to 6 pounds. Attaches to round and flat objects from 1 inch to 2. 5 inches thick, roll bars, such as handlebars, railings, car windows, and tables. Fits any device with a 1/4-20 tripod screw; measures 4 inches x 1 5/8 inches x 6 1/8 inches and weighs 6. 5 ounces; limited lifetime warranty. Ball and socket head allows for quick and easy adjustment and positioning of equipment at any angle.
BrandPEDCO #ad
ManufacturerPedco #ad
Height1.6 Inches
Length4 Inches
Weight0.4 Pounds
Width6.1 Inches
Part NumberPED22
ModelP-UCA25

2. UTEBIT

#ad

UTEBIT C Clamp with Tripod Head Adjustable Camera Clamp Mount Set for Desktop 360 Degree Swivel Mini Ball Head with Hot Shoe and 1/4 Screw Compatible for Canon Nikon DSLR Monitor

#ad
UTEBIT #ad - Tripod ball head: 360 degree rotation, maximum load weight is 3kg; With the locking knob, ball head can be adjusted at any angle. Camera c clamp: with anti-slip soft plate, it can be equipped on camera stand, tubes, it can prevent scratches from camera; Maximum height: 60mm, lamp tripod with a diameter under 60mm free.

Package included: 1 x c clamp, 1 x mini Ball Head. Material: aluminum alloy + rubber + plastic, lightable, stable and durable. An ideal set meet for different shooting requirments according to your need. Equipped with 1/4 inch screw : 4 pieces 1/4" screws at c clamp, tripod, suitable for for most DSLR cameras, it can be mounted on camera from 4 angles as the photo show; 1 piece 1/4" screw at mini ball head top part and 1/4" thread hole at the bottom, led, lamp tripod etc.
BrandUTEBIT #ad
ManufacturerUTEBIT #ad
Height5.2 Inches
Length1.57 Inches
Width4.17 Inches
Part NumberUTEBIT_ROPT_360S_CCAP_L
Model4335036398

3. UTEBIT

#ad

UTEBIT C Clamp with 1/4" Screw Adjustable Camera Mount Clamps Bracket Max. 2.36 Inch High for Photo Studio Photography DSLR Video Light Support Light Stand Quick Release U Clip Holder

#ad
UTEBIT #ad - Adjustable c clamp jawthe c clamp jaw can be expanded to Max. With 4 pcs 1/4 screwequipped with 4 pieces 1/4'' screw, meeting different direction shooting needs.

With non-slip rubber padequipped with Non-slip rubber pad, avoid damage to the camera desk by friction. Dslr, camera or flash light can be firmly fixed on the clamp. Wide range of uses widely used in shooting or video recording, fit for photo studio shooting, small and portable, family or outdoor photography.2. 36 inches/60mm, compatible with the desk or tube within 60mm thickness. Stable & durableheavy duty camera mount clamp, stable and durable.
BrandUTEBIT #ad
ManufacturerUTEBIT #ad
Height6.69 Inches
Length2.95 Inches
Weight0.66 Pounds
Width1.77 Inches
Part NumberUTEBIT_CCAP_L_USA
Model4332013949

4. MOSHUSO

#ad

MOSHUSO Heavy Duty C Clamp Camera Clamp Mount with 1/4" Screw for DSLR Camera, Max. 1.3 Inch High

#ad
MOSHUSO #ad - Suitable for the accessories with diameter less than 33mm, like a table, bike, tube, umbrella, etc. Thick rubber paddingno-slip rubber pad around the 1/4" screws protect your device from scratching; thick rubber in the clamp guarantee the stability.

Net weight: 238g / 8. 4 oz. Four 1/4" screwthe c shape support features four 1/4"-20 screws at top / side / bottom, tripod, lamp tripod, led, suitable for for most DSLR cameras, etc. Universal usagedesigned to firmly attach the dslr camera or flash light on table. Max payload is 4kg / 8. 8lb. Durable & stablemade of high-quality aluminum alloy & stainless steel the bottom is plastic. An ideal c-shape clamp that meets for different shooting requirments according to your need. Adjustable jawcan be adjusted up to 33mm / 1. 3 inch.
BrandMOSHUSO #ad
ManufacturerMOSHUSO #ad
Part NumberMSS-VA-2021030801

5. Dazzne

#ad

Panel Light, 12.9-22inch Tabletop C Clamp Mount Stand, Video Light, Adjustable Table Aluminum Light Stand with Standard 1/4 Screw Tip for DSLR Camera, Ring Light, Dazzne Desk Mount Stand

#ad
Dazzne #ad - Durable material made: clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying. What you get: an aluminum stand, 1-year warranty, 24 hours customer service.

Desk mounting stand: you can mount the stand on the table with practical C-clamp that is up to 2. 7 inch, saving much available space. Adjustable tabletop light stand: height of stand can be expanded from 12. 9 inch32. 7cm to 22 inch56cm, support thickness from 06 inch1. 5cm to 3. 4 inches8. 8cm. Applicable and universal: desk clamp stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4” adapter, such as ring light, DSLR camera, video camera, panel light.
BrandDazzne #ad
ManufacturerDazzne #ad
Part Number2759

6. CAMVATE

#ad

CAMVATE Camera Clamp Mount for DSLR Camera Led Video Light and Binoculars Holder Mount

#ad
CAMVATE #ad - 360° pan Adjustment. Have twelve 1/4"-20 thread holes and one 3/8"-16 thread hole. Clamp grips Flat or Round Surfaces. The c-clamp comes with 1/4"-20 ball head mount, such as DSLR Camera, Led video light, compatible with the device with 1/4"-20 thread hole, and so on. Fits device with a 1/4"-20 Tripod Socket.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height1 Inches
Length7 Inches
Weight0.5 Pounds
Width5 Inches
Part NumberC1122
ModelC1122-1

7. apyr aoma

#ad

Ring Light, Desk Mount Light Stand, 13.5-23.5 inch Adjustable C-Clamp Camera Desk Mount with 1/4" Hot Shoe Mount Adapter for DSLR Camera, Video Light

#ad
apyr aoma #ad - Desk light mount clamp - the camera mount is adjustable for fitting different table through adjust the knob and screw. Standard 1/4 inch screw-designed with standard 1/4" screw, ring light, this desk light mount supports most photography lighting equipment such as, smartphone holder, led video light, DSLR cameras etc.

The clamp can support the table thickness from 2 inches/5 centimeters to 3. 5 inches/9 centimeters. This flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle. Work on monitor, nikon canon speedlite flash, ring light, magic arm, trigger, mic and any accessories that has a camera type of shoe. User-friendly - inside of your package, 1x adjustable desk light stand, you will receive 1x C-clamp, 1x 1/4" Universal E Type Flash cold shoe bracket.

Adjustable stand-the camera desk mount stand height can be adjusted from 13. 5 inches/35 centimeters to 23. 5 inches /59 centimeters through fixed knob; It is a convenient Use For Camera stand And Ring light Mount. Universal e type flash cold shoe bracket - swivel table light stand mount with umbrella holder.
Brandapyr aoma #ad
Manufacturerapyr aoma #ad
Part NumberD-S 01

8. jusmo

#ad

14.5-37.7 inch Adjustable, Table Aluminum Light Stand with 1/4" Screw Tip, Desk C-Clamp Mount Stand for DSLR Camera/Ring Light/Video Light/Webcam, JUSMO Camera Desk Mount Stand with 360° Ballhead

#ad
jusmo #ad - Universal desktop light stand, 1. 96 inch clip distance, compatible with most desk. Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying.

Dslr desk mount stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4” adapter, such as ring light, DSLR camera, panel light, key light, webcam, video camera, Elgato Master Mount accessories. Camera desk mount stand 14. 5-37. 7 inch adjustable. Note: webcam, ring light, panel light, DSLR camera Not included. Gives you ample height for overhead shooting and lighting. Desk clamp stand have removable ball head with an industry-standard 1/4" Screw allows you to expand your rig.
Brandjusmo #ad
ManufacturerJUSMO #ad
Height1.18 Inches
Length14.57 Inches
Width1.18 Inches
Part NumberLS01-US9

9. ITOTIN

#ad

Desk Mount Stand, Video Conference Light, 2 Pack DSLR Camera Desk Mount C Clamp Light Stand, Ring Light, Video Light, 13.7" ~23.2" Photographic Light Boom Stand with 360° Ball Head for Camera

#ad
ITOTIN #ad - You can use the knob to adjust to the desired angle to meet your needs at different angles. Upgraded table mounting clamp compared with the old version, this tabletop mount clamp has a scratch-resistant pad and a wider mouth up to 3.

4 inches. This desk mount stand is suitable for installing cameras, video conference lights, ring lights, photography lights, with positioning screw, microphones and other equipment with 1/4" nuts. And the contact surface between the mounting clip and the tabletop is wider, making the device stand more stable. Please contact us if you encounter any, we will reply within 24 hours. Multiple angles the 1/4" ball head can ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography when adjusting the angle.

Heavy duty structure the clamp mount stand is made of sturdy and durable aluminum alloy and weighs 490 grams/1. 08 pounds. Retractable desk mount stand the minimum height is 13. 7 inches and can be extended to 23. 2 inches, loosen the knob and then adjust the height. 1-year warranty. Designed for heavy-duty carrying.
BrandITOTIN #ad
ManufacturerITOTIN #ad
Height1.57 Inches
Length7.87 Inches
Width3.15 Inches
Part NumberITO-STAND-TM
ModelNN-STAND
Posted in Uncategorized

Top 9 1/4-20 Male to Male – Camera Mounts & Clamps

As an Amazon Associate I earn from qualifying purchases.

1. Fotasy

#ad

5 Packs Standard 1/4"-20 Male to 1/4"-20 Threaded Screw Adapter Tripod Screw Converter Compatible with Camera Cage Light Stand Monopo Shoulder Rig Tripod

#ad
Fotasy #ad - Precision made 1/4"-20 to 1/4"-20 male to male metal tripod screws international standard. Universal adapter spigot stud for the photography studio use. Package includes 5 x 1/4" Male to 1/4" Male tripod screw adapters. Ideal for connecting two photo equipment devices together such as camera cage shoulder rig tripod socket studio lighting equipment LED Panel GoPro action camera and more! Made of metal solid and durable.
BrandFotasy #ad
ManufacturerFotasy #ad
Height4 Inches
Length4 Inches
Weight0.05 Pounds
Width1 Inches
Part NumberSCM2
ModelSCM5
Warrantyno

2. HotRoyal

#ad

6 Pack International Standard 1/4"-20 Male to 1/4"-20 Male Threaded Tripod Screw Adapter Standard Tripod Mounting Thread Camera Screw Adapter Converter,Precision Made

#ad
HotRoyal #ad - Dimension: length:20mm, diameter:16mm. This is an universal adapter spigot stud for the Photography studio use. Packing: 6 pieces. Precision made 1/4"-20 to 1/4"-20 male to male metal tripod screws, international standard.
BrandHotRoyal #ad
ManufacturerHotRoyal #ad
Height0.62 Inches
Length0.78 Inches
Weight0.01 Pounds
Width0.62 Inches
Part NumberSA6
ModelSA6

3. Anwenk

#ad

Standard 1/4"-20 Male to 1/4"-20 Male Threaded Tripod Screw Adapter Standard Tripod Mounting Thread Camera Screw Adapter Converter, Precision Made 5 Pack

#ad
Anwenk #ad - This is an universal adapter spigot stud for the studio use. Easy to use. Precision made 1/4"-20 to 1/4"-20 male to male metal tripod screws, silver plated, international standard. 5 pieces pack. Approx. Diameter:16mm. Approx. Total length:20mm.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Weight0.1 Pounds
Part Numbercamera 1/4" screw adapter
Modelcamera 1/4" screw adapter 5 pack

4. JJC

#ad

Monopod and Other Devices with Male 3/8"-16 Thread, JJC Male 1/4"-20 to Female 3/8"-16 Threaded Screw Converter Adapter for Mounting Camera and Other Devices with Female 1/4"-20 Thread to Tripod

#ad
JJC #ad - Reduces 3/8"-16 screw to 1/4"-20 Size. Male 1/4"-20 thread to female 3/8"-16 thread, 2 layers of rubber gasket for tightening. Enables you to mount camera and other devices with female 1/4"-20 thread to tripod, monopod and other devices with male 3/8"-16 thread. Material: Aluminum. Adapter size: 38mmdiameter x 23mmheight.
BrandJJC #ad
ManufacturerJJC #ad
Part NumberGMF1438
ModelGMF1438

5. Anwenk

#ad

2Pack Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4"-20 Male to 1/4"-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong &Solid Update

#ad
Anwenk #ad - 1/4" brass nut in the bottom, work for light stands/ flash holders with 1/4" screw head. Flash hot shoe to 1/4" thread updated solid metal connection Base, Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.

Note: may not Work for Sony Flash. Comes with 1/4"-1/4" male to male screw for your varied configuration. Designed with cold foot, standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes. Package includes 2x flash hot shoe mount adapter updated;2x 1/4"-1/4" screw. 100% money Back. Note: camera, flash, umbrella holder and tripod are not included.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Part NumberShoe Mount Adapter 2Pack

6. Anwenk

#ad

1/4 to 3/8 5 Pack, Anwenk Standard 1/4"-20 Male to 3/8"-16 Male Threaded Camera Screw Adapter Tripod Screw Converter

#ad
Anwenk #ad - Easy to use. Precision made camera 1/4"-20 to 3/8"-16 male to male tripod mounting screws, silver plated, international standard. Heavy duty. 5 pieces pack. This is a universal adapter spigot stud for the studio use, on video system like camera cage/shoulder rig/tripod/socket studio/lighting equipment/LED panel/GoPro and more! Approx. Total length:19mm. Approx. Diameter:16mm.
BrandAnwenk #ad
ManufacturerAnwenk #ad
Height0.67 Inches
Length0.79 Inches
Weight0.06 Pounds
Width0.67 Inches
Part Number1/4-3/8male-5
Model1/4-3/8male-5

7. CAMVATE

#ad

CAMVATE 1/4"-20 Female Threaded Adapter to 3/8"-16 Male Threaded Post2 Pieses

#ad
CAMVATE #ad - Height base: 13mm 051",diameter: 16mm 063". The adapter is made of brass. Height inc thread: 20mm 079". Weight: 23g. Thread adapter male 3/8"-16 to Female 1/4"-20 .
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height0.1 Inches
Length4 Inches
Weight0.05 Pounds
Width3 Inches
Part NumberC1243

8. CAMVATE

#ad

CAMVATE Thread Adapter Microphone Stand 5/8"-27 Female to 1/4"-20 Male for Camera Monitor

#ad
CAMVATE #ad - Weight:12g. Material: Nickel Brass. 2 pieces. It is perfect to mount cameras or LCD monitors on a microphone stand. 5/8"-27 female threads fit standard microphone stands. 1/4"-20 male stud fits cameras with a standard tripod screw mount. The mic stand adapter provides 1/4"-20 male to 5/8"-27 female.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height0.5 Inches
Length4 Inches
Weight0.04 Pounds
Width2.7 Inches
Part NumberC1361
Model.

9. CAMVATE

#ad

CAMVATE 1/4" Female to 3/8" Male & 3/8"-16 Female to 1/4"-20 Male Screw Adapter for Tripod and Camera and Qr Plate/Adapter Brass

#ad
CAMVATE #ad - Material: Brass with nickel plated. Fits 1/4" &3/8" threaded Hole. Fits 3/8" & 1/4" male Thread. Net weight: 43g.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height0.1 Inches
Length4 Inches
Width2.7 Inches
Part NumberC0910-US
Model4332049097
Posted in Uncategorized

Top 10 25mm Rod Clamp – Camera & Photo

As an Amazon Associate I earn from qualifying purchases.

1. SMALLRIG

#ad

Ronin MX, Freefly MOVI, 1860, SMALLRIG 25mm 1 inch Rod Clamp for Ronin-M

#ad
SMALLRIG #ad - Smallrig 25mm rod clamp for dji ronin-m, ronin mx 1860 is aiming at mounting additional accessories on the camera series for DJI Ronin. Note: it doesn't fit for dji ronin, since the diameter for DJI Ronin bar is 30mm. Compatibility: for ronin M, Ronin MX and any other 25mm or 1 inch rods. Evf, ball head, cold shoe mount can be installed by screws on arrays of 1/4'' and 3/8'' screw holes. Suitable for ronin m, ronin MX and any other items with 25mm or 1 inche rods.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height1.69 Inches
Length1.89 Inches
Weight0.15 Pounds
Width1.12 Inches
Part Number1860
Model1860

2. NICEYRIG

#ad

101, NICEYRIG 25mm Rod Clamp with 1/4 3/8 Thread for DJI Ronin M MX Freefly MOVI Gimbal Stabilizer System

#ad
NICEYRIG #ad - Plus, a hollowed heart shape makes it stylish. Universal and versatile - can attach camera attachments, like LED light, microphone, monitor, audio recorder on it for gimbal system. Light and attractive - made of black anodized aluminum, durable and lightweight. Multiple mounting points - equipped with 1/4''-20, 3/8''-16 threaded holes and a 1/4 countersink on the top to add cold shoe adapter, friction arm, magic arm, ball head mount, etc. 25mm rod clamp - dedicated for ronin-m Ronin-MX gimbal stabilizer, freefly MOVI handlebar or other diameter 25mm rods.
BrandNICEYRIG #ad
ManufacturerNICEYRIG #ad
Part NumberUS-201228101

3. MOSHUSO

#ad

MOSHUSO 25mm 1 Inch Rod Clamp for DJI Ronin M Ronin MX Freely MOVI, Monitor Mount Adapter with Built-in Cold Shoe 1/4” and 3/8” Thread Holes

#ad
MOSHUSO #ad - There are buil-in cold, 3/8” and 1/4" threaded holes on the clamp for cold hot shoe, ball head mount or articulating arms. Fully compatible with dji ronin-m ronin-MX, Freefly MOVI or any rod of diameter 25mm/1 inch. You can mount video accessories on to the gimbal with this quick release adapter, such as LED light, control handle, monitor, microphone, audio recorder. Material: Aluminum alloy. This 1 inch rod clamp/monitor mount is designed for Dji Ronin-M Ronin-MX 3-axis stabilizer top handlebar.
BrandMOSHUSO #ad
ManufacturerMOSHUSO #ad
Part NumberC0314A

4. CAMVATE

#ad

CAMVATE 25mm Rod Clamp Monitor Mount for DJI Ronin-M

#ad
CAMVATE #ad - The articulated mini ball head have 1/4"-20 thread screw, minitor, you can amount flashlight, LCD device, DSLR cameras, etc. The rod clamp have two 1/4“-20 thread hole. This single rod clamp just fix the 25mm diameter pipe. Material:alunimum alloy and anodized in black.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Part NumberC1411-US
ModelCOMINU049804

5. CAMVATE

#ad

Red Knob, CAMVATE Light Mount Stand Bracket 25mm Rod Clamp Holder for DJI Ronin-M, Freefly MoVI

#ad
CAMVATE #ad - Compatible with DJI Ronin-M. This product is made of High Quality Machined, Anodized In Black. Can be installed on any 25mm round Rod / Pipe. It can mount your led linght or the device with hot shoe base on DJI Ronin-M.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height1 Inches
Length5.5 Inches
Weight0.13 Pounds
Width4 Inches
Part NumberC1167
Model4332011302

6. Riqiorod

#ad

Aluminum Rod Light Mount Stand Bracket, Freefly MoVI for The Zhiyun Crane V2 Dual Handles, 25mm Rod Clamp Holder Hot/Cold Shoe Extender for DJI Ronin-M

#ad
Riqiorod #ad - This product is made of High Quality Aluminum Machined, Anodized In Black. Fit all rods from 24. 9mm ~ 25. 5mm. Can be installed on any 25mm round Rod / Pipe. Compatible with dji Ronin-M, Freefly MOVI.
BrandRiqiorod #ad
ManufacturerRiqiorod #ad
Part NumberRRM-15
Model4335045125

7. CAMVATE

#ad

CAMVATE 25mm Rod Clamp Monitor Mount for Ronin-M Gimbal Stabilizer

#ad
CAMVATE #ad - Have three 1/4"-20 and oen 3/8”-16 Threaded Hole. Compatible with dji Ronin-M, Freefly MOVI. Cnc machining made. Material: Aluminum. Also can mount on Any 25mm Rod/Round Pipe.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height0.5 Inches
Length5 Inches
Weight0.13 Pounds
Width4 Inches
Part NumberC1457
ModelCOMINU051149

8. NICEYRIG

#ad

Compatible with DJI Ronin M MX Gimbal, NICEYRIG V Lock Quick Release Plate with 25mm Rod Clamp

#ad
NICEYRIG #ad - Adjustable - the wingnut is spring loaded, and can be pulled out and turned to a more user friendly position after being tightened. Quick release v lock assembly plate - the v-lock assembly plate is designed as a quick release set based on the standard V-Lock.

Lightweight and durable - Made of black anodized aluminum, durability for long life operation but lightweight. The v-mount battery can be attached on top of the Ronin M to power accessories conveniently. Quick release adapter for gimbal stabilizer - you can mount video accessories, audio recorder, control handle, monitor, microphone, such as LED light, on to the gimbal with this quick release adapter. But it is not compatible with DJI Ronin1. 25mm rod clamp - this 25mm rod clamp is compatible with dji ronin-M Ronin-MX gimbal stabilizer, freely MOVI handlebar or other diameter 25mm rods.
BrandNICEYRIG #ad
ManufacturerNICEYRIG #ad
Part Number0097
ModelNA

9. NICEYRIG

#ad

NICEYRIG Compatible QR Rod Clamp DJI RoninM MX MOZA Gimbal Stabilizer with 360 Degree Swivel Monitor Shoe Mount

#ad
NICEYRIG #ad - Mini ball head with hot shoe - this ball heads can withstand heavy loads, and move smoothly. But it is not compatible with DJI Ronin 1. Light and durable - made of black anodized aluminum, durability for long life operation but lightweight.

Quick release adapter for gimbal stabilizer - you can mount video accessories, monitor, control handle, such as LED light, audio recorder, microphone, on to the gimbal with this quick release adapter. With hot shoe adapter, lock solidly, you can mount it onto a DSLR hot shoe. 25mm rod clamp - this 25mm rod clamp is compatible with dji ronin-m Ronin-MX gimbal stabilizer, freely MOVI handlebar or other diameter 25mm rods. Adjustable - the wingnut is spring loaded, and can be pulled out and turned to a more user friendly position after being tightened.
BrandNICEYRIG #ad
ManufacturerNICEYRIG #ad
Part Number096
ModelNA

10. Acouto

#ad

Acouto Rod Clamp 25-27mm Light Mount Stand Bracket Rod Clamp Holder Rod Clamp Mount for DJI Ronin-M Feiyu for Zhiyun Monitor Accessory

#ad
Acouto #ad - 100% brand new, please be assured of your purchase. Fitmentthis rod clamp can mount your led light or the device with hot shoe base on for DJI Ronin-M. Easy to installprovided with two 3/8inch screw interface, one 1/4inch screw interface and one hot shoe interface, convenient for kinds of mounting equipments.

Compatible with for DJI Ronin-M, for Zhiyun and for Feiyu. Rubber insidethe inner part of the rod clamp has rubber to prevent the equipment from scratching during installation and use. Solid, firm and durable to use. 25mm-27mmthis rod clamp holder can be installed on any 25mm-27mm round rod/pipe. Cnc texture, ensures a long service life. Professional manufacturing makes it highly reliable. High qualitythis rod clamp mount is made of high quality aluminum alloy material.
BrandAcouto #ad
ManufacturerAcouto #ad
Height0.98 Inches
Length4.33 Inches
Width3.54 Inches
Part NumberAcoutotudi7sghcb
Posted in Uncategorized

Top 10 Handle for Camera Rig – Professional Video Stabilizers

As an Amazon Associate I earn from qualifying purchases.

1. ChromLives

#ad

ChromLives Camera Handle Grip Support Mount Universal Handlegrip Camera Stabilizer with 1/4 inches Male Screw for Digital Video Camera Camcorder Action Camera LED Video Light Smartphone

#ad
ChromLives #ad - Compatible with any devices with 1/4" thread hole, gopro tripod mount, smallphone mount, such as add to a ball head mount to acheive 360 degree rotation, and so on. Easily mounted to any dslr camera, LED video light, GoPro, smart phones and more!. This universal handle grip features 1/4" screw on top. Superb metal construction body with durable rubber on surface. Anti-slip and ergonomic design, very comfortable to use. This listing is for the handle grip only. Will comes without lanyard/camera/smartphone mount.
BrandChromLives #ad
ManufacturerChromLives #ad
Height1.18 Inches
Length3.94 Inches
Weight0.23 Pounds
Width1.18 Inches
Part Number1125
ModelHandle Grip

2. UURig

#ad

Universal Video Stabilizing Rig W 3 Cold Shoe Adapters for Sony A7III to Mount Microphone, Easy Low Angle Shots Metal, Monitor, LED Light, UURig R005 Camera Hot Shoe Top Handle Grip

#ad
UURig #ad - Cold shoe mount adapters with dislocation design to avoid interference. Richer mounting options - plenty of 1/4" 3/8" screw mount for DIY mounting options. Helps with camera stabilization even without gimbal stabilizer.

You can mount the grip towards forwards or the back. Solid and simple structure - the cheese handle is made of Aluminum alloy, sturdy, durable but lightweight. Perfect for professional and amateur photographer, applicable for Sony, videographer, Canon, Olympus, filmmaker to do handheld video/filming moving footage creation. Ergonomic design - Comfortable for handle hold and easy to carry around.

Allows doing low angle and various angles shots easily. Easy mounting - the top handle grip could be mounted on camera hot shoe port directly, Lumix, Nikon, firmly and easily tightened by screw knob; could be widely used with cameras hot shoe, Pentax DSLR etc. Integrated 3 cold shoe extension mounts - To add monitor, flash, video light, microphone, mic receiver or other accessories etc.
BrandUURig #ad
ManufacturerUURig #ad
Part NumberR005

3. Arcen

#ad

LED Light, Monitor, Easy Low Angle Shoots Metal, R005 Camera Top Handle Camera Top Cheese Handle Grip Universal Video Stabilizing Rig W 3 Cold Shoe Adapters to Mount Microphone

#ad
Arcen #ad - Perfect for professional and amateur photographer, Olympus, firmly and easily tightened by screw knob; could be widely used with cameras hot shoe, applicable for your Canon, Nikon, filmmaker to do creation.

Cold shoe mount adapters with dislocation design to avoid interference. Solid and simple structure; the cheese handle is made of Aluminum alloy, durable but lightweight. The top handle girp could be mounted on camera directly, videographer, Pentax DSLR etc. There are 1/4"and 3/8" mounting points for additional accessories attachment.

Integrated 3 cold shoe extension mounts, video light, flash, microphone, to add monitor, mic receiveer or other accessories etc. This handle is equipped with four shoe mounts at both ends for attaching camera lights, microphone, etc. A cold shoe mount on top, compatible with flash speed light, monitor mount, EVF mount, led video light, microphone mount, etc.
BrandArcen #ad
ManufacturerArcen #ad
Part NumberR005 camera unevesal handle

4. CAMVATE

#ad

CAMVATE DSLR Wood Wooden Handle Grip Mount Support for DV Video Cage Rig Left Hand

#ad
CAMVATE #ad - 1/4"-20 threaded thumbscrew, red rig and other 15mm DSLR Camera Rig, compatible with RED camera, 15mm Cage. The wood handle is use for the left hand. If you mind the color difference, please purchase the wood handles specially sold in pairs when you want both left and right ones. Asin:b07432yBKF. Rosewood handle, note: the wood handles are made of nature wood, but some color deviation may exist among them. The wood handle is specially designed for DV Video Cage Rig. Ergonomic wood handgrip.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height2.1 Inches
Length5.4 Inches
Weight0.1 Pounds
Width4.1 Inches
Part NumberC1242-US
ModelHandle Grip

5. SMALLRIG

#ad

SMALLRIG Camera Top Handle Grip with Top Cold Shoe Base for DSLR Camera Cage Video Camcorder Rig, Rubber, 1446

#ad
SMALLRIG #ad - Mounting pointsthe smallrig camera handle with 1/4-20 mounting points in front, can attach SmallRig railblock 1549 to build a screw to rod mounting option. Satisfaction warranty all smallrig camera rigs come with a year warranty, any problem after purchasing please contact us, we will try our best to help you within 24 hours.

Exquisite designthe smallrig versatile handle is made by aluminium alloy and rubber, this material is light, durable, is very sturdy and solid, you will feel very safe carrying the rig around with this solid and light handle stabilizer rig. Compatiblitythis smallrig camera handle grip can be attached to a camera cage directly with 2pcs 1/4 inch screws the adjustable space between two 1/4 inch screws is 30mm-40mm, cage 2098, cage 1660, such as SMALLRIG cage 2238, cage 2097, Fits any dslr cage with the standard 1/4 20 thread on top, cage 1982, cage 1889 and any other cages of SMALLlRIG.

Top handlethis smallrig top handle built-in shoe mount for microphone and video lights, the non-slip rubber DSLR camera top handle, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height2.76 Inches
Length5.2 Inches
Weight0.35 Pounds
Width1.5 Inches
Part NumberHandle-1446
Model1446

6. RangerRider

#ad

Selens Camera Top Handle Grip Adjustable Video Stabilizing Rig with 2 Cold Shoe and Arri Locating Point for Sony A7iii, Nikon DSLR Cameras

#ad
RangerRider #ad - Easy to mount--top handle grip could be mounted on camera hot shoe port directly, firmly and easily tightened by screw knob. Compatiblity--with two shoe mounts on the top and at the back respectively, to which the light accessories, magic arm, such as Monitor, microphone, could be attached.

Exquisite design--specially offer a 1/4" spanner for free access. Universal cameras hot shoe compatible for most DSLR Sony, Canon, Nikon Camera etc. Metal construction--made of high quality aluminum alloy, canon, Nikon, sturdy, Olympus, durable but lightweight. Universal compatible for most DSLR Sony, Pentax DSLR etc. Professional mounting points--equipped with the hole pattern for arri accessory mount pins, so you can attach ARRI compatible extension blocks.

Perfect for professional and amateur photographer, videographer, filmmaker to do handheld video/filming moving footage creation. It is magnetically attached to Handle, stable and not easy to fall. Simply slide forwards and backward to find the balance point of your rigs. It is quite convenient when you need to improve the camera and rigs balance.
BrandRangerRider #ad
ManufacturerRangerRider #ad
Height2.76 Inches
Length4.53 Inches
Weight0.4 Pounds
Width0.98 Inches
Part NumberCamera Grip

7. MAGICRIG

#ad

MAGICRIG DSLR Camera Handle Universal Hand Grip NATO Handle Kit with 48mm NATO Rail and Cold Shoe for Camera Cage Rig

#ad
MAGICRIG #ad - So that makes it very easy to use for balancing the camera for handheld use. It is very easy to assemble and disassemble the handle. Double cold shoe: the handle comes with two built-in cold shoe which could attach to the microphone mount and flash.

Mounting points:arrays of 1/4" -20 and 3/8"-16 mounting holes on the handle for mounting additional accessories, magic arm, rod clamp, such as Ball head, etc. Easy disassembly: the nato clamp on one end is compatible with nato rail, simply slide it onto the nato rail and tighten the thumbscrew. Balance adjust: except for sliding it forward and backward on the NATO rail to balance the camera's center of gravity, the handle is back and forth adjustable for you to find the balance position of your rig.

You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need. Spanner: it comes with an allen wrench on the side, which attaches via magnet inside the handle.
BrandMAGICRIG #ad
ManufacturerSmpuvte #ad
Part NumberSM-312

8. SMALLRIG

#ad

Camera Cage 1638B, SmallRig Camera Top Handle Cheese Handle Grip with Built-in Shoe Mount for Camera Rig

#ad
SMALLRIG #ad - Compatiblitysmallrig top handle 1638 can be attached to a camera cage directly with 2pcs 1/4 inch screws the adjustable space between two 1/4 inch screws is 30mm-40mm, cage 1982, Fits any cage with the standard 1/4 20 thread on top, such as SMALLRIG cage 2087, cage 2049, cage 1889 and any other cages of SMALLRIG.

Exquisite designthe smallrig versatile handle is made by aluminium alloy, durable, this material is light, is very sturdy and solid, you will feel very safe carrying the rig around with this solid and light handle stabilizer rig. Camera cage handlethis smallrig top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease.

Package includes: 1 x top handle; 1 x Hex Spanner ; 2 x 1/4" Screws. Mounting pointsthe smallrig 1638 camera handle with abundance of 1/4'' and 3/8'' mounting points, can attach different SMALLRIG rigs on it for additional attachment options and DIY operations.
BrandSMALLRIG #ad
ManufacturerSmallRig #ad
Height2.76 Inches
Length4.45 Inches
Width1.57 Inches
Part Number1638B-CF-FBA-US
ModelSR-FM01-1638

9. CAMVATE

#ad

CAMVATE Camera Handle Grips Handlebar Support Kit for DSLR Camera Camcorder Shoulder Rig

#ad
CAMVATE #ad - The dslr rig handle includes two our 15mm rod clamp handle grips, a 30cm aluminum rod and a 4 Holes Extendable Rod Clamp. Material: made of Aluminum alloy. Net weight: 343. 6g.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height1.6 Inches
Length13.2 Inches
Weight0.76 Pounds
Width3.9 Inches
Part NumberC0933
Model4332011788

10. SMALLRIG

#ad

Cold Shoe Mount for Camcorder Camera Cage, 1955, Top Handgrip with Mounting Points, SMALLRIG NATO Rail Handle

#ad
SMALLRIG #ad - This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories. The handle is equipped with three shoe mounts on the top, magic arm, in the front and at the back respectively, such as microphone, to which the light accessories, could be attached.

Except for sliding it left and right on the Rail to keep your camera balance, you can also slide forwards and backwards to find the balance point of your rigs. Simply slide onto safety NATO rail and tighten down the thumbscrew.

It is designed for quick release attaching and detaching on the camera without screws. Smallrig handles nato handle grip is a sliding top cheese handle for moving shoots, g85, x-t2 camera cages, gh5, a6000/a6300/a6500 camera cages, compatibility with small-sized mirrorless camera cages and SWAT NATO Rails: A7/A7r/A7s/A7II/A7RII/A7SII, GH4, G7, etc.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height2.6 Inches
Length4.65 Inches
Width0.98 Inches
Part NumberSR-FM01-1955
Posted in Uncategorized

Top 9 Cheeses Of The World – Electronics Features

As an Amazon Associate I earn from qualifying purchases.

1. Kai Pure Komachi 2

#ad

Kai Pure Komachi 2 Cheese Knife, AB5073, 4.5 Inch Blade with Yellow Rubber Handle

#ad
Kai Pure Komachi 2 #ad - 5-inch pure komachi2 cheese knife by kai USA. Perfect combination of blade styles for all your cutlery needs. Blades feature high carbon stainless steel that retain a super-sharp 16 Degree cutting edge; Includes sheath for blade protection. Color-matched handles are light-weight, comfortable and ergonomically designed to reduce fatigue. 4. Fda-approved, non-stick coating on each blade is color-coded; prevents cross-contamination, provides easy food release.
BrandKai Pure Komachi 2 #ad
ManufacturerKershaw #ad
Height4 Inches
Length13 Inches
Weight0.13 Pounds
Width1 Inches
Part NumberKS5073
ModelAB5073

2. Cheese Maker Profession Phone Cases

#ad

IPhone 11 World's Greatest Cheese Maker for Cheese Makers Case

#ad
Cheese Maker Profession Phone Cases #ad - Printed in the USA. Gift for Cheese Maker Professionals. Two-part protective case made from a premium scratch-resistant polycarbonate shell and shock absorbent TPU liner protects against drops. Easy installation. Cheese maker job, profession, Worker or Occupation Best Gifts for Cheese Makers. World's greatest cheese Maker in Black Print.
BrandCheese Maker Profession Phone Cases #ad

3. Cheese Maker Profession Phone Cases

#ad

Galaxy S9+ World's Greatest Cheese Maker for Cheese Makers Case

#ad
Cheese Maker Profession Phone Cases #ad - Cheese maker job, profession, Worker or Occupation Best Gifts for Cheese Makers. Easy installation. Gift for Cheese Maker Professionals. Two-part protective case made from a premium scratch-resistant polycarbonate shell and shock absorbent TPU liner protects against drops. World's greatest cheese Maker in Black Print. Printed in the USA.
BrandCheese Maker Profession Phone Cases #ad

4. CAMVATE

#ad

CAMVATE 15mm Cheese Rod with 1/4"-20 and 3/8"-16 Thread Hole for DSLR Rigs Camera Video Cage 197mm

#ad
CAMVATE #ad - Material: Aluminum Alloy. Diameter: 15mm. With 1/4"-20 threaded holes and 3/8"-16 threaded holes. With m12 thread on Each End. Length: 197mm.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Weight0.09 Pounds
Part NumberC1557
Model4332066065

5. Elgato

#ad

Elgato Video Capture, Digitize Video for Mac, PC or iPad USB 2.0

#ad
Elgato #ad - Transfer video from a VCR or other analog video source to your Mac or PC. Comes with elgato video capture, Composite-to-SCART adapter, Composite video/RCA stereo cable. Easy-to-use software guides you through every step and turns your analog into digital. Captures video in the universal h. 264 digital format – ready for iPad, iMovie, Windows Live Movie Maker, and YouTube. World-ready; handles ntsc, secaM, PAL and PAL/60 video. Put family memories and family videos on your computer. Video resolution: 640×480 4:3 or 640×360 16:9.
BrandElgato #ad
ManufacturerCorsair #ad
Height1.38 Inches
Length1.73 Inches
Weight0.34 Pounds
Width4.49 Inches
Part Number1VC104001001
Model1VC104001001
Warranty1 Year Limited Warranty

6. Green Bay Clothing Company

#ad

Green Bay Against The World Football Cheesehead Collection PopSockets Grip and Stand for Phones and Tablets

#ad
Green Bay Clothing Company #ad - Advanced adhesive allows you to remove and reposition on most devices and cases. Collapsible grip provides a secure hold for easier texting, photos, calling, and selfies. Works best with smooth, waterproof, hard plastic cases. Calling all cheeseheads! New styles from Green Bay Clothing Company. Note: will not stick to some silicone, or highly textured cases. Expandable stand to watch videos, take group photos, FaceTime, and Skype handsfree. Will adhere to iphone 11, but not to the iPhone 11 Pro nor the iPhone 11 ProMax without a suitable case.
BrandGreen Bay Clothing Company #ad
ManufacturerPopSockets #ad
Height0.3 Inches
Length1.6 Inches
Width0.5 Inches
Model260027

7. ZHOUHAOMAOYI

#ad

Paris Case for New iPad Pro 11 Inch 2020 2nd Generation,World Famous Town France Tourist Icons Wine Coffee Cheese Bakery Hand Drawn Print Decorative Supports Apple Pencil Pairing & Charging Smart

#ad
ZHOUHAOMAOYI #ad - Muti-angle stand – magnetic front cover can be folded into either a viewing or typing stand. Auto wake/sleep – just opened and closed the lid, you can easily make your tablet wake or sleep, easy and convenient to use.

Not compatible with any other iPad models. Compatibility – designed for the apple ipad pro 11 2020 model: a2068, a1934, a2013, a2228, A2230, a2231 and ipad pro 11 2018 Model:A1980, A1979. Slim & light-weight – slim and lightweight add no bulk to your iPad, you could carry it with your iPad everytime and everywhere. Premium materials – flexible back and hard polyurethane cover provide a non-slip grip; protection from cracks & scratches; and easy installation/removal.
BrandZHOUHAOMAOYI #ad
ManufacturerZHOUHAOMAOYI #ad
Part NumberPRO_2TU_US13927_2020PRO-11
ModelPRO_2TU_US13927_2020PRO-11

8. Magicsd Designs Pepperoni Pineapple Crust Tees

#ad

Worlds Greatest Pizza Maker Best Cheese Dough Funny Cool PopSockets Grip and Stand for Phones and Tablets

#ad
Magicsd Designs Pepperoni Pineapple Crust Tees #ad - Worlds greatest pizza maker is perfect for drivers, restaurant workers, chefs, family and coworkers that bake their own, home cooks or anyone that loves the pie. Note: will not stick to some silicone, or highly textured cases.

Excellent for new york or chicago, birthdays, Vegan Pizza Day, national cheese pizza day, Christmas, National Pizza Day, or your favorite pizza maker. Works best with smooth, hard plastic cases. Collapsible grip provides a secure hold for easier texting, calling, photos, and selfies. You will get a ton of compliments for the fun pasta message.

Will adhere to iphone 11, waterproof, but not to the iPhone 11 Pro nor the iPhone 11 ProMax without a suitable case. Expandable stand to watch videos, take group photos, FaceTime, and Skype handsfree. Advanced adhesive allows you to remove and reposition on most devices and cases. Grab these for your friends, or enjoy a big slice.
BrandMagicsd Designs Pepperoni Pineapple Crust Tees #ad
ManufacturerPopSockets #ad
Height0.3 Inches
Length1.6 Inches
Width0.5 Inches
Model260027

9. OWC

#ad

OWC 64.0GB 4X 16GB PC10600 DDR3 ECC-Registered 1333MHz 240 Pin Memory Upgrade for Select 2009-2012 Mac Pro Models

#ad
OWC #ad - 4 x 16gb 64gb owc pc10600 ddr3 ecc 1333 mhz 240 pin dimm 1. 5v mac pro Ram Upgrade Kit. Compatible with 2010-2012 mac pro model id: Mac Pro5, 1, 8-core models Mid 2010 Owc memory lifetime limited warranty including advanced replacement program; note: 16GB modules require that all installed modules be of the same capacity, Other existing Apple or 3rd party 1GB, 2GB and 4GB modules are not supported for use with these kits and need to be removed when these modules are added.

Memory upgrade kit for mac pro 2009-2012 'nehalem' & 'westmere' models and pc desktops with intel / amd; matched set, perfect for the Mac Pro 12-core / 8-core Xeon systems! Compatible with 2010-2012 mac pro model id: mac pro5, 1, 12-Core models mid 2010-2012.
BrandOWC #ad
ManufacturerOther World Computing #ad
Part NumberOWC1333D3X9M064
Model1333D3X9M064