As an Amazon Associate I earn from qualifying purchases.
Incorporates advanced igbt inverter technology with an excellent Arc stability. The torch design provides a sure and comfortable grip made with heat and impact resistant material.
Automatic compensation for voltage fluctuation, automatic temperature control, over-load protection, over-voltage protection, over-current protection, under-voltage protection, and fan dormancy. Quick setup: npt 1/4" industry type d coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.

The lightweight model design makes the machine very convenient to carry anywhere. Cut-50hf can achieve perfect cutting, aluminum alloy, v-grooves, slots, aluminum and other conductive metals, copper, holes, circles, low-carbon steel, curves, angles, notches, and the strength of its components makes it a reliable work tool for professionals or individuals.
With less work, you can achieve better results overall with sharper cuts. 60% duty cycle can ensure long-term and efficient cutting. Cut-50hf is designed with multiple safety and protection functions, over-loading protection, such as automatic compensation for voltage fluctuations, over-current protection, plasma torch gun safety protection, over-heating protection, etc. It is designed for demanding industrial work and construction and simple tasks around houses. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor. Can cut up to 4/5 in.


It is fully suitable for difficult operations in construction sites, agricultural sites, ship docks, and relatively remote areas.80% duty cycle can ensure long-term and efficient cutting.
Stainless steel, notches, angles, cast iron, low-carbon steel, aluminum and other conductive metals, pig iron, and many others in minutes. The cutting effect is very ideal and can finish the work effortlessly and quickly, spray painted, dirty, rusty, greasy, regardless if the material is very rough, etc. With less work, you can achieve better results overall with sharper cuts. Can cut up to 1. 0 in.

With less work, you can get a better overall result with a sharper cut. It can automatically detect the input voltage and automatically compensate the voltage, allowing you to use it easily at 200-250V.
Apc-80hf is an intelligent power supply system. The cutting effect is very ideal and can finish the work effortlessly and quickly, greasy, rusty, etc. Apc-80hf is designed with multiple safety and protection functions, over-loading protection, such as automatic compensation for voltage fluctuations, over-current protection, over-heating protection, plasma torch gun safety protection, etc.80% duty cycle can ensure long-term and efficient cutting. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally.

Stainless steel, angles, v-grooves, circles, pig iron, and many others in minutes. The fan with automatic temperature control allows the machine to run very quietly. The cutting effect is very ideal and can finish the work effortlessly and quickly, rusty, regardless if the material is very rough, dirty, spray painted, greasy, etc.
With less work, so that you can easily use it in of 90V to 300V, you can achieve better results overall with sharper cuts. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor. Can cut up to 1.


The fan with automatic temperature control allows the machine to run very quietly. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
Apc-80hf is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-current protection, plasma torch gun safety protection, over-loading protection, over-heating protection, etc. With less work, you can get a better overall result with a sharper cut. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. Can cut up to 1.

The 60% duty cycle ensures long-term effective use. It can weld 1/2-inch stainless steel, carbon steel, alloy steel, cast iron, and copper perfectly. The cutting effects of the cts-200b is very effective. Cts-200b is a multifunctional machine with an exquisite appearance and superb production technology.
It incorporates the most advanced IGBT inverter technology along with the most creative combination design. The high-frequency argon arc welding and STICK welding can complete various tasks easily, effortlessly, and quickly. It also integrates the three-in-one functions of high-frequency cutting machines. The tig high frequency ignition system is 100% accurate and effective, iron, steel, making the welding products extremely clean and perfect. The fan with automatic temperature control allows the machine to run very quietly.

Can cut up to 1. 0 in. Apc-60hf incorporates the most advanced igbt inverter technology and non-touch pilot arc cutting processes, rusty, dirty, greasy, resulting in excellent arc stability.
Power source type: ac 100-250V, 50/60Hz. The fan with automatic temperature control allows the machine to run very quietly. Apc-60hf is an intelligent power supply system. Stainless steel, alloy steel, pig iron, slots, low-carbon steel, cast iron, circles, v-grooves, copper, notches, aluminum and other conductive metals, resulting in straight cuts, angles, curves, and many others in minutes. Apc-60hf can achieve perfect cutting, aluminum alloy, iron, holes, and the strength of its components makes it a reliable work tool for professionals or individuals.
1. AmicoPower
#ad
Amico CUT-50, 50 Amp Plasma Cutter DC Inverter 115/230V Dual Voltage Cutting Machine
#adAmicoPower #ad - Can cut up to 3/4 in. And is designed for both demanding industrial work, construction, including home and hobby use. Cuts stainless steel, mild steel, holes, v-grooves, angles, notches, circles, and other metal materials with ease, aluminum, copper, alloy steel, slots, resulting in straight cuts, curves, and many others in minutes.Incorporates advanced igbt inverter technology with an excellent Arc stability. The torch design provides a sure and comfortable grip made with heat and impact resistant material.
More information #ad
It requires less work to produce an overall better result with a cleaner cut. 100~250v wide voltage, 50~60hz, almost all of the voltage and frequency can be used. Automatic compensation for voltage fluctuation, automatic temperature control, over-load protection, over-voltage protection, over-current protection, under-voltage protection, and fan dormancy. Quick setup: npt 1/4" industry type d coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.
Brand | AmicoPower #ad |
Manufacturer | Amico Electric #ad |
Height | 13.86 Inches |
Length | 17.91 Inches |
Weight | 21 Pounds |
Width | 7.87 Inches |
Part Number | CUT502019 |
Model | CUT-50 |
More information #ad
2. AmicoPower
#ad
Amico CUT-50HF 50Amp Non-touch Pilot Arc Plasma Cutter, 3/5 in. Clean Cut Cutting Machine, Pro. 95~260V Wide Voltage
#adAmicoPower #ad - The fan with automatic temperature control allows the machine to run very quietly. Cut-50hf incorporates the most advanced igbt inverter technology and non-touch pilot arc cutting processes, rusty, greasy, resulting in excellent arc stability. Stainless steel, cast iron, alloy steel, resulting in straight cuts, pig iron, iron, and many others in minutes.The lightweight model design makes the machine very convenient to carry anywhere. Cut-50hf can achieve perfect cutting, aluminum alloy, v-grooves, slots, aluminum and other conductive metals, copper, holes, circles, low-carbon steel, curves, angles, notches, and the strength of its components makes it a reliable work tool for professionals or individuals.
More information #ad
It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas. Cut-50hf is an intelligent power supply system. With less work, you can achieve better results overall with sharper cuts. 60% duty cycle can ensure long-term and efficient cutting. Cut-50hf is designed with multiple safety and protection functions, over-loading protection, such as automatic compensation for voltage fluctuations, over-current protection, plasma torch gun safety protection, over-heating protection, etc. It is designed for demanding industrial work and construction and simple tasks around houses. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor. Can cut up to 4/5 in.
Brand | AmicoPower #ad |
Manufacturer | Amico Electric #ad |
Height | 13.86 Inches |
Length | 17.91 Inches |
Weight | 25 Pounds |
Width | 7.87 Inches |
Part Number | ACUT50HF2020 |
Model | CUT-50HF |
More information #ad
3. AmicoPower
#ad
110/220V Dual Voltage Cutting Machine, Amico CUT-50, Professional 50 Amp Plasma Cutter, 4/5 in. Clean Cut
#adAmicoPower #ad - Torch design provides a sure, comfortable grip made from heat and impact resistant material. You can cut stainless steel, alloy steel, copper aluminum, mild steel, and other metal materials. Auto-voltage automatically adapts to 100-240V input power, plug adapters included.More information #ad
50 amp digital air inverter plasma cutter handles cuts up to 1. 0". Designed for both demanding industrial and construction work, or home and hobby use. Less cleaning, noxious gases, you have simply less overall work and a better, maintenance, and less fire hazard, cleaner cut.Brand | AmicoPower #ad |
Manufacturer | Amico Power #ad |
Height | 14 Inches |
Length | 18 Inches |
Weight | 31 Pounds |
Width | 8 Inches |
Part Number | CUT502021 |
Model | CUT-50 |
More information #ad
4. AmicoPower
#ad
Amico CUT-60HF, 4/5 in. Clean Cut Cutting Machine, Pro. 95~260V Wide Voltage, 60 Amp Non-touch Pilot Arc Plasma Cutter
#adAmicoPower #ad - Cut-60hf incorporates the most advanced igbt inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. Cut-60hf can achieve perfect cutting, aluminum alloy, slots, iron, copper, alloy steel, v-grooves, circles, resulting in straight cuts, curves, holes, and the strength of its components makes it a reliable work tool for professionals or individuals.It is fully suitable for difficult operations in construction sites, agricultural sites, ship docks, and relatively remote areas.80% duty cycle can ensure long-term and efficient cutting.
More information #ad
The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. Cut-60hf is designed with multiple safety and protection functions, over-current protection, such as automatic compensation for voltage fluctuations, plasma torch gun safety protection, over-heating protection, over-loading protection, etc. Stainless steel, notches, angles, cast iron, low-carbon steel, aluminum and other conductive metals, pig iron, and many others in minutes. The cutting effect is very ideal and can finish the work effortlessly and quickly, spray painted, dirty, rusty, greasy, regardless if the material is very rough, etc. With less work, you can achieve better results overall with sharper cuts. Can cut up to 1. 0 in.
Brand | AmicoPower #ad |
Manufacturer | Amico Power #ad |
Height | 12.9 Inches |
Length | 19 Inches |
Weight | 25 Pounds |
Width | 7.6 Inches |
Part Number | CUT602027 |
Model | CUT-60HF |
More information #ad
5. AmicoPower
#ad
80A Non-touch Pilot Arc Air Plasma Cutter, 80% Duty Cycle, 1.2 inch Clean Cut, 220V/50-60Hz Cutting Machine, Grey, Full Size, AmicoPower APC-80HF
#adAmicoPower #ad - The fan with automatic temperature control allows the machine to run very quietly. It is fully suitable for difficult operations in construction sites, agricultural sites, ship docks, and relatively remote areas. Apc-80hf can achieve perfect cutting, low-carbon steel, aluminum alloy, holes, iron, v-grooves, resulting in straight cuts, copper, notches, curves, pig iron, cast iron, aluminum and other conductive metals, and the strength of its components makes it a reliable work tool for professionals or individuals.With less work, you can get a better overall result with a sharper cut. It can automatically detect the input voltage and automatically compensate the voltage, allowing you to use it easily at 200-250V.
More information #ad
Apc-80hf incorporates the most advanced igbt inverter technology and non-touch pilot arc cutting processes, spray painted, dirty, regardless if the material is very rough, resulting in excellent arc stability. Apc-80hf is an intelligent power supply system. The cutting effect is very ideal and can finish the work effortlessly and quickly, greasy, rusty, etc. Apc-80hf is designed with multiple safety and protection functions, over-loading protection, such as automatic compensation for voltage fluctuations, over-current protection, over-heating protection, plasma torch gun safety protection, etc.80% duty cycle can ensure long-term and efficient cutting. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally.
Brand | AmicoPower #ad |
Manufacturer | Amico Electric Corp #ad |
Height | 16 Inches |
Length | 20 Inches |
Weight | 32 Pounds |
Width | 9 Inches |
Part Number | APC802011 |
Model | ARC-80HF |
More information #ad
6. AmicoPower
#ad
1.2 inch Clean Cut, Amico APC-70HF, 70 Amp Non-touch Pilot Arc Air Plasma Cutter, 80% Duty Cycle., 90~300V Wide Voltage Cutting Machine
#adAmicoPower #ad - Apc-70hf is an intelligent power supply system. Apc-70hf can achieve perfect cutting, copper, notches, aluminum alloy, resulting in straight cuts, slots, alloy steel, cast iron, low-carbon steel, iron, curves, aluminum and other conductive metals, holes, and the strength of its components makes it a reliable work tool for professionals or individuals.Stainless steel, angles, v-grooves, circles, pig iron, and many others in minutes. The fan with automatic temperature control allows the machine to run very quietly. The cutting effect is very ideal and can finish the work effortlessly and quickly, rusty, regardless if the material is very rough, dirty, spray painted, greasy, etc.
More information #ad
Apc-70hf is designed with multiple safety and protection functions, over-loading protection, over-current protection, over-heating protection, plasma torch gun safety protection, such as automatic compensation for voltage fluctuations, etc. With less work, so that you can easily use it in of 90V to 300V, you can achieve better results overall with sharper cuts. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor. Can cut up to 1.
Brand | AmicoPower #ad |
Manufacturer | Amico Power #ad |
Height | 15.7 inches |
Length | 19.7 inches |
Weight | 31 Pounds |
Width | 8.7 inches |
Part Number | APC70HF2020 |
Model | APC-70HF |
More information #ad
7. AmicoPower
#ad
CUT-50/60 APC-50/60 CTS-200, Amico CUT5060-050, 50-pcs Plasma Cutter Consumables
#adAmicoPower #ad - It can also withstand extremely high temperatures, making it extremely suited for professional cutting. 20 pieces torch nozzles, 20 pieces torch electrodes, 10 pieces ceramic shield cups, Total 50 piece of consumables.More information #ad
High quality 60 amp sg-55/AG-60 plasma cutter torch consumables. Amico designed professional consumables set for models CUT-50/60 APC-50/60 and CTS-200 Cut5060-050 has strong durability; the duration is five times longer than other products.Brand | AmicoPower #ad |
Manufacturer | Amico Electric #ad |
Weight | 2 Pounds |
Model | CUT5060-050 |
More information #ad
8. AmicoPower
#ad
Professional 80-Amp Pilot Arc Plasma Cutter, AmicoPower APC-80HF, 220V/50-60Hz Cutting Machine, 1.2 inch Clean Cut, 80% Duty Cycle
#adAmicoPower #ad - 80% duty cycle can ensure long-term and efficient cutting. It is designed for demanding industrial work and construction as well as simple tasks around houses. The cutting effect is very ideal and can finish the work effortlessly and quickly, dirty, rusty, spray painted, etc. It can automatically detect the input voltage and automatically compensate the voltage, allowing you to use it easily at 200-250V.The fan with automatic temperature control allows the machine to run very quietly. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
More information #ad
Stainless steel, circles, low-carbon steel, resulting in straight cuts, iron, cast iron, curves, holes, notches, slots, pig iron, aluminum alloy, angles, and many others in minutes. Apc-80hf incorporates the most advanced igbt inverter technology and non-touch pilot arc cutting processes, regardless if the material is very rough, greasy, resulting in excellent arc stability. Apc-80hf is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-current protection, plasma torch gun safety protection, over-loading protection, over-heating protection, etc. With less work, you can get a better overall result with a sharper cut. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. Can cut up to 1.
Brand | AmicoPower #ad |
Manufacturer | Amico Electric #ad |
Height | 16 Inches |
Length | 20 Inches |
Weight | 31 Pounds |
Width | 9 Inches |
Part Number | APC802021 |
Model | APC-80HF |
More information #ad
9. AmicoPower
#ad
200-Amp HF-Strart TIG, 3-in-1 Combo Welding Machine., AMICO CTS-200, 200-Amp Stick Arc DC Inverter Welder With 50-Amp Plasma Cutter
#adAmicoPower #ad - The npt 1/4-inch industrial D-type coupler can be quickly and easily connected to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. Cts-200b is an intelligent power supply system that can automatically detect the input voltage.The 60% duty cycle ensures long-term effective use. It can weld 1/2-inch stainless steel, carbon steel, alloy steel, cast iron, and copper perfectly. The cutting effects of the cts-200b is very effective. Cts-200b is a multifunctional machine with an exquisite appearance and superb production technology.
More information #ad
It also has a set variety of safety and protection functions, over-load protection, such as over-heat protection, plasma torch gun safety protection, over-current protection, short circuit protection, etc. It incorporates the most advanced IGBT inverter technology along with the most creative combination design. The high-frequency argon arc welding and STICK welding can complete various tasks easily, effortlessly, and quickly. It also integrates the three-in-one functions of high-frequency cutting machines. The tig high frequency ignition system is 100% accurate and effective, iron, steel, making the welding products extremely clean and perfect. The fan with automatic temperature control allows the machine to run very quietly.
Brand | AmicoPower #ad |
Manufacturer | Amico Power #ad |
Height | 14 inches |
Length | 19 Inches |
Weight | 28 Pounds |
Width | 9 inches |
Part Number | CTS2002021 |
Model | CTS-200 |
More information #ad
10. AmicoPower
#ad
1.0 inch Clean Cut, 100-250V Wide Voltage, Full Size, AmicoPower Amico APC-60HF, Grey, 60-Amp Non-touch Pilot Arc Plasma Cutter
#adAmicoPower #ad - Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. The lightweight model design makes the machine very convenient to carry anywhere. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it.Can cut up to 1. 0 in. Apc-60hf incorporates the most advanced igbt inverter technology and non-touch pilot arc cutting processes, rusty, dirty, greasy, resulting in excellent arc stability.
More information #ad
It is designed for demanding industrial work and construction and simple tasks around houses. It is fully suitable for difficult operations in construction sites, agricultural sites, ship docks, and relatively remote areas.80 percent duty cycle can ensure long-term and efficient cutting. Power source type: ac 100-250V, 50/60Hz. The fan with automatic temperature control allows the machine to run very quietly. Apc-60hf is an intelligent power supply system. Stainless steel, alloy steel, pig iron, slots, low-carbon steel, cast iron, circles, v-grooves, copper, notches, aluminum and other conductive metals, resulting in straight cuts, angles, curves, and many others in minutes. Apc-60hf can achieve perfect cutting, aluminum alloy, iron, holes, and the strength of its components makes it a reliable work tool for professionals or individuals.
Brand | AmicoPower #ad |
Manufacturer | Amico Power #ad |
Height | 15.7 Inches |
Length | 20 Inches |
Weight | 31 Pounds |
Width | 8.7 Inches |
Part Number | APC602022 |
Model | APC-60HF |
More information #ad