Posted in Uncategorized

Top 10 CNC Motion Controller – Desktop Barebones

As an Amazon Associate I earn from qualifying purchases.

1. Wal front

#ad

MACH3 Motion Card 4 Axis USB CNC Motion Controller Card Breakout Board for Engraving 100 KHz

#ad
Wal front #ad - 0-10 v output port-having 0-10v output port, the mach3 software can be used to control the spindle motor speed. 4 general-purpose output-with 4 general-purpose isolated relay drive output interface, forward rotating and reverse rotating, can drive four relays for controlling the spindle starts, pumps and other device.

It also need an external 24v DC power supply to isolate USB and external port, making the system more stable. 100 khz-the maximum step-pulse frequency is of mach3 motion card is 100KHz, which is suitable for the servo or stepping motor. Support-the mach3 motion card supports automatic probe tool, limit switch, emergency input, connecting electronic handwheel.

With 1 status led, the connection status could be indicated on the board clearly. 4 general-purpose inputs-with 4 general-purpose inputs, probe switch, estop switch, you can connect the limit switch, back to zero and other device. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives.
BrandWal front #ad
ManufacturerWal front #ad
Height1.18 Inches
Length3.54 Inches
Weight0.29 Pounds
Width3.54 Inches
Part NumberWal front3q19wexfyb

2. CNCdrive

#ad

CNCdrive UC100 USB to Parallel CNC Motion Controller

#ad
CNCdrive #ad - Operate a cnc machine over a USB connection. Pulses at rates up to 100 kHz. Works seamlessly with Mach3 Software sold separately. Replaces the standard parallel port interface.
BrandCNCdrive #ad
ManufacturerCNCdrive #ad
Height0.5 Inches
Length2 Inches
Weight0.13 Pounds
Width2 Inches
Part NumberUC100
ModelUC100

3. SainSmart

#ad

SainSmart 4 Axis Mach3 USB CNC Motion Controller Card Interface Breakout Board MC3D3 V2.1

#ad
SainSmart #ad - Support for connecting electronic handwheel. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor.

General-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other devices. General-purpose opto-couplers isolation input: can connect the limit switch, home switch, emergency stop switch, auto tool zero, etc. Have 0-10v signal output, you can use mach3 software to control the spindle motor speed.
BrandSainSmart #ad
ManufacturerSainSmart #ad
Part Number019211
Model4331030127

4. Oumefar

#ad

3-6 Axis 300kHz Ethernet Mach3 Motion Controller EC300 CNC Control System Ethernet Motion Control Card Board for Mach3 Software3 Axis

#ad
Oumefar #ad - Power supply: the main power supply is 24vdc, the current should be higher than 1AThe controller already supply the power for IO port, the current should be higher than 1A. Wonderful components: our ethernet motion control card board adopts ARM motion control chip, A, and it also owns two relays to output, Z, users can choose motion control 3-6 AxisX, Y, B, C as optional choice.

Product description: this ec300 control system is a high-performace external motion controller for Mach 3 software, with Ethernet interface supporting standard MPG and Digital Dream MPG, which is an ideal choice for you. Io power is 24vdc power supply input, no need the external power supply for IO port anymore.

Network connecting: this 300khz ethernet motion controller can communicate with a connection to a control computer's network, and the network connection can be built with direct connection or via router/Swith devices. Input ports: our dc 24v cnc control system possesses 12 opto-isolated digital input ports and 10 opto-isolated digital output ports, 1 analog output port of 0-10V adjustable speed for spindle can change to PWM output port.
BrandOumefar #ad
ManufacturerOumefar #ad
Height2.76 Inches
Length8.66 Inches
Weight1.7 Pounds
Width4.33 Inches
Part NumberOumefarhy9sozgw7c-01

5. ViaGasaFamido

#ad

DM800 CNC Motion Controller Handwheel 460 KHz Handheld Stand-alone CNC Controller System for 3-Axis/4-Axis/5-Axis CNC Router Engraving Machine5 Axis

#ad
ViaGasaFamido #ad - Read g code from U-DISK. More detailsthe main device is a 24vdc power input, and the current should be greater than 1A; Built-in MPG, 3. 8" tft screen, 16 user keys.

Input & output20-port photoelectric isolated input interface; 12-port photoelectric isolated output interface. Ethernet communication from the handle to the motherboard, without the need of computer operation. 1 port 0-10v spindle speed analog output interface can be changed to PWM output. With arm motion control chip. Motion controller without computer operationthe dm800 is a motion controller without a computer. Easy to read g filedm800 cnc controller only needs u disk in g-codE file, can read and run G file. Supports stepper systemsupport stepper system, 460 KHz pulse output per axis.
BrandViaGasaFamido #ad
ManufacturerViaGasaFamido #ad
Height0 Inches
Length0 Inches
Weight3.13 Pounds
Width0 Inches
Part NumberViaGasaFamidopg01muv3rs-13

6. CNC Drive

#ad

UC100 USB Motion Controller

#ad
CNC Drive #ad - Upto 100kHz operation. Replaces the LPT port. Controls upto 6-axis simulteneously. Works with uccnc, mach3 or Mach4 softwares via plugin. Usb connection to the control PC.
BrandCNC Drive #ad
ManufacturerCNC Drive #ad
Part NumberUC100+UCCNC
ModelUC100+UCCNC

7. ZGQA-GQA

#ad

ZGQA-GQA C300 Stepper Motor Control CNC Motion Controller, 300Khz USB Mach3 Motion Control Card Breakout Interface Board, Stepper Motor Driver Board 3Axis

#ad
ZGQA-GQA #ad - 3-6 axis for variety needs: this usb cnc motion controller has different axis meet variety needs, 3-6 Axis X, Y, B, C for option, A, Z, max.

Powe supply and current: main power supply is 24V DC, current should be higher than 1A. Usb mach3 stepper motor: USB communication for Mach 3 software. Opto-isolated design: 12 opto-isolated digital input ports, 10 opto-isolated digital output ports. Frequency output 300Khz/Axis. Io power: io power is 24v dc power supply input, system already supply the power for IO ports, current should be higher than 1A By the IO power supply, so the external power supply is not needed for IO port anymore.
BrandZGQA-GQA #ad
ManufacturerZGQA-GQA #ad
Weight0 Pounds
Part NumberZGQA-GQA

8. Wal front

#ad

CNC 5-axis Stand Alone Motion Controller Offline CNC Controller 500KHz USB Motion Controller 7 Inch Large Screen

#ad
Wal front #ad - A variety of externally manual functions can be defined for easy use. Manual operation: it can realize manual, back to program zero, jog, back to mechanical zero, coordinate clearing and other operations. Humanized window man-machine interface.

With touch type keyboard, low noise and easy operation. Parameter setting: various control parameters related to processing and operation can be set to achieve better processing effect. Support the hand wheel control interface. Etc. The motion controller adopts high performance 32 bit cpu and high performance fpga, the system has the characteristics of high reliability, high precision, equipped with 7 inch LCD display. Memory uses external USB with built-in 8GTF card, large storage space.

The controller has 5 axis linkage and multi-micro segment forward-looking control algorithm, which can realize five axis linear interpolation and five axis multi-micro multi-line continuous interpolation, and has break line continued carving control, power-off storage coordinate function. Program management: program can create, modify, copy and paste, continuous, delete, read, automatic processing, save, pause.
BrandWal front #ad
ManufacturerWal front #ad
Height3.94 Inches
Length11.81 Inches
Weight2.58 Pounds
Width7.87 Inches
Part NumberWal front1oh9dvt8qx

9. GHMOZ

#ad

GHMOZ Electrical Equipment CNC MACH3 USB 5 Axis 100KHz USBCNC Smooth Stepper Motion Controller Card Breakout Board for CNC Engraving 12-24V

#ad
GHMOZ #ad - High-quality materials are high-quality, strong, safe, and have a long service life. Stb5100 5-axis mach3 usb controller card, easy to use, support for all versions of Windows operating system, suitable for all versions of mach3 software, very suitable for the users that using mach3 software to make engraving machine.1 x mach3 5 axis stb5100 USB motion card.
BrandGHMOZ #ad
ManufacturerGHMOZ #ad
Weight0 Pounds
Part Number926302

10. iFCOW

#ad

IFCOW Motion Control Card NVEM CNC Controller 6 Axis MACH3 Ethernet Interface Motion Control Card Board

#ad
iFCOW #ad - With 12 programmable input interfaces, it can be configured with functions such as limit emergency stop. 3. Used for portrait, landscape, seal and other artistic graphic sculpture. 4. With cnc controller, calligraphy engraving, it is suitable for all kinds of small and medium-sized automatic equipment and instruments. Spindle pwm output control, Ethernet interface, support MACH3 software. Dc electrical isolation, Optocoupler isolation. It can control 6 stepper motor running at the same time maximally.
BrandiFCOW #ad
ManufactureriFCOW #ad
Height2.95 Inches
Length6.89 Inches
Weight0.79 Pounds
Width4.72 Inches
Part Number1206023-1015-AM114-3730
Model1206023-1015-AM114-3730