As an Amazon Associate I earn from qualifying purchases.
i-Socket #ad - The i-socket technology is professional-grade, UL certified and includes intelligence to control the inrush current, and safe, durable, helping to prevent circuit overload.
Use an i-socket with anything from your miter saws, shop, table saws to hand held sanders, rotary and oscillating tools. The additional manual mode switch is a must-have for your dust collector accessories because it allows you to run your vac and other tools independently.
senctrl #ad - Compatibility: support a wide range of cutting tools from handheld devices to large shop saws such as table saw, router table, planers, 15 Amp, chop saw, shopvac, miter saw, automated vacuum switch, remote control outlet, track saw, 60 Hz, sander, dust collection systems for woodworking and etc.
Shut off delay: automatically delay vacuum turn-off by 7s to continue clearing the remaining airborne debris after the load connected to the 'TOOL' port has stopped. If the load connected to the 'tool' port exceeds 30w, the vacuum connected to the 'VAC' port will automatically delay 1s to start, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time.
Turn on delay. High-quality materials: adopt 19. 7 inch ul-certified us standard 14awG power cord which allow passage with a large current more than 30A. Durable pc+abs v0 grade flame retardant material case, reduce heat during use and extend service life. You can not only turn the vacuum on/off automatically with the power tools, but also manually turn the vacuum on/off all time according to your actual condition. Power rating should not exceed 120 VAC, 1875w.
Ortis #ad - Configurable actuation threshold: 30w/60w, you can select flexibly appropriate actuation threshold according to your actual condition. Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life. Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping.
Max motor rating should not exceed 120V/15A 50/60Hz, Joiners, Table Saws, 1875W. New generation: addition of two tool outlets, each key for corresponding option, no need extra extension socket, Off and On; The values are clearly displayed with LED indicators, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, easier to check and set.
Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency. Adopting ul-certified american Standard 14AWG power cord which allowable passage with a large current more than 30A. Prevent vacuum from running too long or being unable to shut off after tool has stopped.
Ortis #ad - Prevent vacuum from running too long or being unable to shut off after tool has stopped. Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life. Configurable actuation threshold: 30w/60w, you can select flexibly appropriate actuation threshold according to your actual condition.
New generation: addition of two tool outlets, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, no need extra extension socket, Off and On; The values are clearly displayed with LED indicators, each key for corresponding option, easier to check and set.
Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency. Adopting ul-certified american Standard 14AWG power cord which allowable passage with a large current more than 30A.
Etoolcity #ad - If the tool motor connected to the 'a' port exceeds 30w, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time. Unique current sensing technology.
More safety. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Two installation methods. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work.
Etoolcity automatic vacuum switch has a starting threshold of approximately 025 amps30watts at 120v and 60watts at 220v, perfectly suited for medium-sized work loads such as most Miter Saws, Power Sanders and Routers, Table Saws, and extend the life of your vacuum. Make the work more effective. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems. Both ways are very strong. Suitable for most medium duty workloads.
OONO #ad - The working mode of the dust collector auto - on - off can be manually selected. This function has a power-down memory function, and it does not need to be set again when the power is turned on next time. Length 19 inch 05 meter power cable, UL-certified American Standard 14AWG 2.
08 square millimeter x 3 cores. Automatically turn on and turn off the power of the dust collector, and the power-down memory function of triggering power and delay time settings, making the product more intelligent and friendly. Maximum current 15 amp. Maximum load 1800 Watts.
It will be in auto mode every time it is powered on. If you want the dust collector to work continuously or stop for a long time without being affected by the operation of the tool, you can press the MODE button to select the desired working mode. The threshold power of the trigger tool to start the dust collector can be selected from 30 - 60 - 90 Watts. When you start to use the tool, the dust collector will turn on with a delay of 1 second to avoid overloading and tripping of the power circuit.
CLEESINK #ad - Automatic delays 05s to turn on the vacuum when you start your tool, which is more fast than other switches in the market. Pls check if it fits before buying. Note: the current sum of the tools used on "I"+"II" should not exceed 15 amps. After careful calculation and investigation, we find that 5S is enough to completely clean up your Inlet tube when you complete your work.
Why not make your home a little cleaner? Control box covered with full ABS V0 grade flame retardant material, more safe and reliable. No overload any more - if the tool motor connected to the 'Ⅰ' port exceeds 27.
Please read the manual carefully before use to know the power range of the switch. Premium material makes extreme durable and safe - ul-certified 14AWG power cord which is US standard. Wide compatibility - our automatic vacuum switch has a starting threshold of approximately 025 amps 27. 5watts at 110v, power sanders and routers, table Saws, perfectly suited for medium-sized work loads such as most Miter Saws, and extend the life of your vacuum.
Etoolcity #ad - Superior material makes durable: adopting ul-certified american standard 14awg power cord which allowable passage with a large current more than 30A. Delays 7s to turn off the vacuum to continue clearing the hose of remaining debris after the tool has stopped, this makes your work more effective.
Are clearly printed on the surface to make sure you plug the tool and vacuum into the correct socket. Easy to use: very easy to use etoolcity vacuum switch in only 3 easy steps, just plug it in and you are ready to go. Max motor rating should not exceed 120v/15a 50/60Hz, Table Saws, Joiners, Power Sanders, Routers, 1875W.
Covered with pc+abs v0 grade flame retardant material, thicker wire, Thick copper core, less heat during use and extend service life. A safety must-have in the workshop. Protect your health: fully automatic on off control means less dust! Using Etoolcity automated vacuum switch efficiently minimizes hazardous airborne dust to protect your lung, and helps to comply with OSHA requirements for dust control. The text vacuum outlet and tooL OUTLET etc.
Ortis #ad - Configurable actuation threshold: 30w/60w, allowing you to flexibly select different vacuum actuation threshold according to your actual condition. By accurate monitoring, volts, and let you notice the working hours, it can help you reduce your electricity bill, a stable voltage environment also avoids damage to the power tool, remind you to combine exertion and rest!.
Each key for corresponding option, volts, easier to operate. Auto delays vacuum turn off by an optional time 1-30s to continue clearing the remaining airborne debris after the tool has stopped, reduces work area noise, which protects your respiratory health, improves work efficiency.
Max motor rating should not exceed 120v/15A 50/60Hz, Joiners, Table Saws, Routers, 1875W. Easy to see: lcd screen more intuitively displays various power parameters in real time including power, can be flexibly set according to personal needs, amps etc. New generation: new functions to detect various power parameters in real time, such as power, amps, kilowatt-hours, accumulated time, making it an intelligent steward for you. Prevent vacuum from running too long or being unable to shut off after tool has stopped.
iVAC #ad - 14. Modes of operation: auto, off and on. Dust collector / shop vacuum up to 1HP or 5 Peak HP. Turn off delay ensures that your work area continues to be cleared of remaining airborne debris. 2640 total watts two input power cords permit operation from two separately protected circuits.
1. i-Socket
#adPrevents Inrush Current from Circuit Overload, i-Socket Automated Vacuum Switch, Dust Control with Automatic Shutoff and Delay
#adUse an i-socket with anything from your miter saws, shop, table saws to hand held sanders, rotary and oscillating tools. The additional manual mode switch is a must-have for your dust collector accessories because it allows you to run your vac and other tools independently.
More information #ad
One year warranty included. After turning off your power tool, the i-Socket Workshop switch delays turning off the shop vac by 7 seconds to allow the vacuum to complete the dust collection. The i-socket workshop automatically synchronizes your saws and other cutting tools to turn on your shop vacuum and other tool accessories. It is designed for a standard 125V wall outlet in a home, or jobsite.| Brand | i-Socket #ad |
| Manufacturer | DGC Products #ad |
| Height | 8.9 Inches |
| Length | 2.55 Inches |
| Width | 8.8 Inches |
| Part Number | i-socket-workshop |
| Warranty | Instant 12 month warranty from the date of purchase, and an extended 24 month warranty with online registration |
More information #ad
2. senctrl
#adLoad Sensing, On Delay Prevent Circuit Overload, SENCTRL Automatic Vacuum Switch Allow Power Tool/Table Saw To Turn Vac Cleaner/Accessory On And Off Automatically, Shop Dust Collector Off Delay
#adShut off delay: automatically delay vacuum turn-off by 7s to continue clearing the remaining airborne debris after the load connected to the 'TOOL' port has stopped. If the load connected to the 'tool' port exceeds 30w, the vacuum connected to the 'VAC' port will automatically delay 1s to start, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time.
More information #ad
Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems. New generation: add a manual switch to support three vacuum run modes: Auto, Off and On. Turn on delay. High-quality materials: adopt 19. 7 inch ul-certified us standard 14awG power cord which allow passage with a large current more than 30A. Durable pc+abs v0 grade flame retardant material case, reduce heat during use and extend service life. You can not only turn the vacuum on/off automatically with the power tools, but also manually turn the vacuum on/off all time according to your actual condition. Power rating should not exceed 120 VAC, 1875w.
| Brand | senctrl #ad |
| Manufacturer | SENCTRL #ad |
| Part Number | AVS2000 |
| Model | AVS2000 |
More information #ad
3. Ortis
#adAdjustable Actuation Threshold, Automatic Vacuum Switch with Extra Outlet for Using More Power Tools, Ortis Dust Control Autoswitch Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Yellow
#adMax motor rating should not exceed 120V/15A 50/60Hz, Joiners, Table Saws, 1875W. New generation: addition of two tool outlets, each key for corresponding option, no need extra extension socket, Off and On; The values are clearly displayed with LED indicators, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, easier to check and set.
More information #ad
Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Routers, Power Sanders, Planers etc. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency. Adopting ul-certified american Standard 14AWG power cord which allowable passage with a large current more than 30A. Prevent vacuum from running too long or being unable to shut off after tool has stopped.
| Brand | Ortis #ad |
| Manufacturer | Ortis #ad |
| Height | 3 Inches |
| Length | 5 Inches |
| Width | 4 Inches |
| Part Number | HVC-03Y |
| Model | HVC-03Y |
More information #ad
4. Ortis
#adAdjustable Actuation Threshold, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Automatic Vacuum Switch, Ortis Dust Control Autoswitch for More Power Tools
#adNew generation: addition of two tool outlets, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, no need extra extension socket, Off and On; The values are clearly displayed with LED indicators, each key for corresponding option, easier to check and set.
More information #ad
Max motor rating should not exceed 120v/15a 50/60Hz, Table Saws, Power Sanders, Routers, 1875W. Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Joiners, Planers etc. Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency. Adopting ul-certified american Standard 14AWG power cord which allowable passage with a large current more than 30A.
| Brand | Ortis #ad |
| Manufacturer | Ortis #ad |
| Height | 1 Inches |
| Length | 2 Inches |
| Width | 1 Inches |
| Part Number | hvc-03 |
More information #ad
5. Etoolcity
#adEtoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Automatic Vacuum Switch for Power Tools, Eliminating Circuit Breaker Tripping
#adMore safety. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Two installation methods. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work.
More information #ad
The switch's shell has pc+abs v0 grade flame retardant material, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, it is more reliable and safe to protect work. Etoolcity automatic vacuum switch has a starting threshold of approximately 025 amps30watts at 120v and 60watts at 220v, perfectly suited for medium-sized work loads such as most Miter Saws, Power Sanders and Routers, Table Saws, and extend the life of your vacuum. Make the work more effective. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems. Both ways are very strong. Suitable for most medium duty workloads.
| Brand | Etoolcity #ad |
| Manufacturer | Etoolcity #ad |
| Height | 1 Inches |
| Length | 2 Inches |
| Width | 1 Inches |
| Part Number | ec |
| Model | LF40-HVC01 |
More information #ad
6. OONO
#adAutomatic Dust Control Switch, for Contractors and Woodworkers, Automated Vacuum Switch Automatic Shutoff
#ad08 square millimeter x 3 cores. Automatically turn on and turn off the power of the dust collector, and the power-down memory function of triggering power and delay time settings, making the product more intelligent and friendly. Maximum current 15 amp. Maximum load 1800 Watts.
More information #ad
This function has a power-down memory function, and it does not need to be set again when the power is turned on next time. Operating voltage ac 100 to 130v60hz. The delay time for shutoff can be configured 5 - 15 - 60 seconds, after the tool is stopped, the dust collector can continue to clearing the remaining dust and residue. It will be in auto mode every time it is powered on. If you want the dust collector to work continuously or stop for a long time without being affected by the operation of the tool, you can press the MODE button to select the desired working mode. The threshold power of the trigger tool to start the dust collector can be selected from 30 - 60 - 90 Watts. When you start to use the tool, the dust collector will turn on with a delay of 1 second to avoid overloading and tripping of the power circuit.
| Brand | OONO #ad |
| Manufacturer | CZH-LABS #ad |
| Height | 3.23 Inches |
| Length | 8.86 Inches |
| Width | 4.02 Inches |
| Part Number | F-1047 |
| Model | F-1047 |
More information #ad
7. CLEESINK
#adDust Control Autoswitch with Unique Current Sensing Technology to Delay Vacuum On, CLEESINK Automatic Vacuum Switch for Power Tools, Prevent Circuit Overload and Eliminating Circuit Breaker Tripping
#adWhy not make your home a little cleaner? Control box covered with full ABS V0 grade flame retardant material, more safe and reliable. No overload any more - if the tool motor connected to the 'Ⅰ' port exceeds 27.
More information #ad
5w, the vacuum connected to the 'Ⅱ' port will automatically delay 05s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time. Note: "i"+"ii" current should not exceed 15 amps, otherwise it is easy to overload. Please read the manual carefully before use to know the power range of the switch. Premium material makes extreme durable and safe - ul-certified 14AWG power cord which is US standard. Wide compatibility - our automatic vacuum switch has a starting threshold of approximately 025 amps 27. 5watts at 110v, power sanders and routers, table Saws, perfectly suited for medium-sized work loads such as most Miter Saws, and extend the life of your vacuum.
| Brand | CLEESINK #ad |
| Manufacturer | CLEESINK #ad |
| Height | 1.4 Inches |
| Length | 6 Inches |
| Weight | 0.55 Pounds |
| Width | 2.6 Inches |
| Part Number | AVS-01 |
More information #ad
8. Etoolcity
#adDust Collector Switch for Power Tools, Auto Delay Vacuum On to Prevent Circuit Overload, Delay Vacuum Off for Complete Cleaning, Etoolcity Automatic Vacuum Switch
#adAre clearly printed on the surface to make sure you plug the tool and vacuum into the correct socket. Easy to use: very easy to use etoolcity vacuum switch in only 3 easy steps, just plug it in and you are ready to go. Max motor rating should not exceed 120v/15a 50/60Hz, Table Saws, Joiners, Power Sanders, Routers, 1875W.
More information #ad
Improve work efficiency: automatically delays 1s to turn on the vacuum when you start your tool, which reduces noise. Without running back and forth to hit the vacuum power button, which avoids circuit overload or tripping. Compatibility: etoolcity dust collector switch supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Planers etc. Covered with pc+abs v0 grade flame retardant material, thicker wire, Thick copper core, less heat during use and extend service life. A safety must-have in the workshop. Protect your health: fully automatic on off control means less dust! Using Etoolcity automated vacuum switch efficiently minimizes hazardous airborne dust to protect your lung, and helps to comply with OSHA requirements for dust control. The text vacuum outlet and tooL OUTLET etc.
| Brand | Etoolcity #ad |
| Manufacturer | Etoolcity #ad |
| Height | 1 Inches |
| Length | 3 Inches |
| Width | 1 Inches |
| Part Number | HVC-05 |
More information #ad
9. Ortis
#adMonitor Power Parameters, Automatic Vacuum Switch for Power Tools, Adjustable Actuation Threshold, Ortis Dust Control Autoswitch Delay Vacuum On/Off to Prevent Circuit Overload and Tripping
#adEach key for corresponding option, volts, easier to operate. Auto delays vacuum turn off by an optional time 1-30s to continue clearing the remaining airborne debris after the tool has stopped, reduces work area noise, which protects your respiratory health, improves work efficiency.
More information #ad
Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Power Sanders, Planers etc. Configurable startup & shutoff delay time: automatically delays to turn on the vacuum by an optional time 01-3s when you start your tool, which avoids circuit overload or tripping. Max motor rating should not exceed 120v/15A 50/60Hz, Joiners, Table Saws, Routers, 1875W. Easy to see: lcd screen more intuitively displays various power parameters in real time including power, can be flexibly set according to personal needs, amps etc. New generation: new functions to detect various power parameters in real time, such as power, amps, kilowatt-hours, accumulated time, making it an intelligent steward for you. Prevent vacuum from running too long or being unable to shut off after tool has stopped.
| Brand | Ortis #ad |
| Manufacturer | Ortis #ad |
| Height | 1 Inches |
| Length | 2 Inches |
| Width | 1 Inches |
| Part Number | hvc |
More information #ad
10. iVAC
#adAutomated Vacuum Switch
#adMore information #ad
Turn on delay avoids the two power surges occurring at the same time. No venting holes the ivac's internal components are designed to generate very little heat. Fully certified and approved - featurs tuv safety approved and conforms to UL STD 508 and certified to CSA STDC22. 2 no.| Brand | iVAC #ad |
| Manufacturer | BCTINT Ltd #ad |
| Height | 2.2 Inches |
| Length | 10.8 Inches |
| Weight | 1.5 Pounds |
| Width | 7.8 Inches |
| Part Number | 10031-010 |
| Model | 10031-010 |
More information #ad
