As an Amazon Associate I earn from qualifying purchases.
1. Vetroo #ad
Vetroo MESH6 Mid Tower Computer Case Compact ATX PC Gaming Case 6pcs ARGB Fans Pre-Installed with Controller Diamond-Shaped Mesh Front & Tempered Glass Side Panel Air & Water Cooling Case #adVetroo #ad
- With 5v argb interface, it can be connected to the motherboard to synchronize light effects. Sufficient internal spacecompatible with atx, mini-atx motherboard, support max cpU height of 165mm and GPU length of 350mm, micro-atx, it can install 3 SSD drive and 2 HDD for your computer.
Unique panel designthe diamond-shaped mesh front panel and transparent tempered glass side panel make your case distinctive, and improve the airflow performance.
6 argb fanspre-installed 4pcs 120mm argb fans in the front and 2pcs fans in the rear, provide your case the excellent cooling, colorful lights and unlimited color transformation.
Superior cooling solutionthe case supports up to 10pcs fans at the same time, it also has room for up to 240mm/280mm water cooler on the top and 120mm water cooler on the rear. Controller equippedthe controller can control 6pcs pre-installed fans. Provide the best airflow and keep your case cooling all the time.
2. MUSETEX #ad
Magnetic Design Opening Tempered Glass Panel & Mesh Front Panel Gaming PC Case White, MUSETEX Mesh Micro-ATX Mid Tower Case with 5 PCS × ARGB Fans Pre-Installed and 2 PCS × USB 3.0 Ports, MK7-WN5 #adMUSETEX #ad
- Our usb cable is shielded wire so that you can transmit data without interference. The internal space is wide and easy to install 3 x 2. 5" ssd ；2 x 3. 5" hdd；micro atx/itx motherboard; 120mm/240mm/280mm water cooling; maximum length 340mm GPU（installing vertically or horizontally）; maximum length 180mm CPU air cooling; maximum length 200mm PSU.
More spacemusetex mk7 series has 4mm tempered door opening design and mesh front panel, make it easy and free to disassemble and install computer accessories, and allow maximum airflow to provide cooling for your power supply. Top i/o panel2 x usb3. 0 port, power, led button, 2 x hd audio, reset. Outstanding airflowlarge front panel metal mesh and 5pcs 120mm musetex argb fans are pre-installed for the case to provide lighting and excellent airflow at the same time, keep cooling with the case.
This widest case in all micro cases，the width of this case is 230mm, there is still 38mm distance between GPU and the front glass panel after installing vertical graphics card, which will keep your system cooling.
Multiple argb modes button control has 19 lighting modes ;motherboard control: it connected to the 5V 3PIN header on motherboard, the motherboard control can be unlimited ARGB fans modes Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only. Dust-proof designthe matx pc case is equipped with 2pcs dust filter, and the top magnetic strip dust filter protects the case ; other is PSU dust filter easy for install and cleaning on the bottom. Motherboard compatability: micro-ATX/ Mini-ITX （Not for ATX motherboard）.
|Model||For MICRO ATX/ITX|
|Warranty||10 years warrantys|
3. Montech #ad
Compact ATX Mid Tower Case, Tempered Glass Side Panel, Pre-Installed 4 x 120mm Autoflow Rainbow LED Fans, Front Mesh Ventilation, Montech X1 Black, High Airflow #adMontech #ad
- Tempered glass side panel - Full transparent tempered glass side panel that can showcase your build. Autoflow rainbow fan - pre-installed rainbow LED fan*4 make your system cool and beautiful.
Note: fans are fixed light and not controllable when boots up. High airflow - airflow is maximized by incorporating mesh front panel, top panel ventilation, and rear exhaust.
4. Montech #ad
Mesh 3D Front Panel, Montech Fighter 500 Black ATX Mid-Tower Computer Gaming Case/Pre-Installed Four Rainbow LED Fans, Magnetic Dust Filter/ATX,Micro ATX,Mini-ITX, High-Airflow, Tempered Glass #adMontech #ad
- Excellent dust resistance - Magnetic top vent screen provides excellent dust resistance and is easy to unmount. Fine metal mesh front - large area front mesh with LED Rainbow fans allow maximum airflow and with the bottom mesh providing cooling for your power supply keeping everything stable.
Unique design with m modeling architecture - Front panel is not only designed with our logo of Montech, but also combined the top triangle with bottom triangle.
Pre-installed 4 dazzling rainbow fans create gorgeous color space. Full view glass side panel - the large sized Glass Side Panel, allows for a full view of your PC setup and glorious chromatic lighting effects. This design makes this panel be unique. Dazzling rainbow fans - four pre-installed dazzling LED Rainbow fans, for a glorious color space and lighting effects.
5. Thermaltake #ad
Thermaltake CA-1Q9-00S1WN-00 S100 Tempered Glass Black Edition Micro-ATX Mini-Tower Computer Case with 120mm Rear Fan Pre-Installed #adThermaltake #ad
- 5"/3. One 120mm rear Fan Pre-installed. Slim and compact - full metal construction around the body with sleek front panel design, demonstrating a slim and compact design style. 5" with hdd bracket behind MB Tray. Supports mini itx, Micro ATX Motherboards.
Built-in windowed power cover - Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables. Drive bay - 2 x 2. Dust reductions - a handy magnetic fan filter on the top and on the base of the chassis to help dust filtration and particulate protection. 5" with hdd rack + 2 x 2.
|Warranty||3 year manufacturer|
6. Montech #ad
Montech Flyer White Micro ATX/Mini-ITX/Pre-Installed 2 Fans/High-Airflow/Computer Gaming Case/Hairline Surface Front Panel/RGB LED Shinning Strip/Three Versions Lighting Effects #adMontech #ad
- It can not fit ATX motherboard. Simple rgb mode - with 7colors, 3 lighting modes of switching RGB strip make the panel delicate Side panel with acrylic make the overall quality remarkable Performance and capacity of a full tower in a compact mid-tower size.
Big area air circulation panel with two pre-installed fans, outstanding airflow Top panel with magnetic dust-proof net, easy to take on and off.
2 x 3. 5"hdd can be installed in the rear hdd cage ssd plates support up to 2 x 2. 5" drives usb 2. 0*2 / hd audio*1 / mic*1 / USB 3.0*1 / light control button front Ports Caution: This case only fit with Micro-atx & itx motherboard.
With the soft and removable dust-proof net at the psu, convenient to remove and clean two 12cm black fans are pre-installed at front and rear Support for a total of 8 fans Front 12cm*3 or 14cm*2, Rear12cm*1, Top 12cm*2 or 240mm Water cooling, Inside 12cm*2. Micro atx – elegant hairline surface and occupying little space. Small but attractive.
7. Thermaltake #ad
Thermaltake V200 Tempered Glass RGB Edition 12V MB Sync Capable ATX Mid-Tower Chassis with 3 120mm 12V RGB Fan + 1 Black 120mm Rear Fan Pre-Installed CA-1K8-00M1WN-01 #adThermaltake #ad
- 5". Clear view of pc gaming: 4mm thick Tempered Glass Side panel with standard mounting. 0 x 2, rgb light button. 16 led modes through i/o port rgb light button: rgb mode, white, cyan, light off 7 Colors: red, yellow, green, single color mode 7 Colors, breath mode 7 Colors, blue, Purple.
I/o port: usb 3. Built-in psu cover: cover all your cables for a professional look combined with a window to show off your colorful power. Drive bays: 3 x 2.
Light up the system: 3 pre-installed 120mm 12v motherboard sync rgb fans Sync with ASUS, MSI, Asrock, Gigabyte, and BIOSTAR 12V header Motherboards plus 1 Black fan at back. Max cpu cooler height: 160mm/ max vga length: 380mm/ Max PSU length: 170mm.
Built-in dual-mode 12v sync controller: control light via i/o port, gigabyte, asrock, MSI, rgb light button 16 LED modes/7 Color or via 12V header RGB sync motherboard Sync with Asus, and BIOSTAR 12V header Motherboards.5" plus 2 x 3. Dimension: 17. 6 x 8. 54 x 17 inch / 447 x 217 x 432 mm. 0 x 1, hd audio x 1, usb 2. Supports mini itx, micro ATX, and ATX motherboard.
|Warranty||3 year warranty|
8. Thermaltake #ad
Thermaltake V250 Motherboard Sync ARGB ATX Mid-Tower Chassis with 3 120mm 5V Addressable RGB Fan + 1 Black 120mm Rear Fan Pre-Installed CA-1Q5-00M1WN-00 #adThermaltake #ad
- Supports mini itx, micro ATX, and ATX motherboard. 9" h x 8. 0 x 2, rgb light button x 1. I/o port - usb 3. Drive bays - 3 x 2. 27 led modes via i/o port - wave mode/ flow mode/ rgb lighting single color / Breath mode 8 Colors / full lighted mode/ Single Color mode 7 Colors / Radar mode Red, yellow green Cyan blue White Purple / Light Off.
Light up the system - 3 pre-installed 120 millimeter 5v motherboard Sync ARGB fans Sync with ASUS, ASRock, Gigabyte, MSI, Biostar that has 5V addressable RGB header.5
5" plus 2 x 2. Outstanding expandability - 7 expansion slot / max cpu cooler height: 160 millimeter / max vga length: 320 millimeter / Max PSU Length: 160 millimeter with HDD Rack, 200 millimeter without HDD Rack.
Dimension: 16. 5"/3. 52" w x 18. 78" d / 13. 36 pounds. Clear view of pc gaming - 4 millimeter thick Tempered Glass Side panel with standard mounting. 5". Built-in dual mode 5v argb switch board - control light via the I/O port button 27 LED modes/7 Colors or via 5V ARGB Sync motherboard RBG software.
|Warranty||3 year manufacturer|
9. Raidmax #ad
Raidmax NEON Gaming Computer Case See-Through Front and Side Panel with x3 RGB Front Fans Pre-Installed #adRaidmax #ad
- Also available in White LED version**. Color changing button is on top right of the case. No remote control included. Support video card length up to 13. 98 inches 355 mm. High speed usb 3. 0 top mounted and HD Audio. 3 argb fans Pre-installed. Front and Side See-Through.
|Part Number||NEON RGB G21RWB|
10. Vetroo #ad
High Airflow Mesh Front/Dust Filter, Air Water Cooling Ready, Pink, Vetroo A03 Mid-Tower ATX Gaming PC Case, Pre-Installed 3pcs ARGB/PWM Fans with Controller, Door Opening Tempered Glass Design #adVetroo #ad
- Mesh & tempered glass panel: the mesh front panel and top dust filter provide more airflow and cooling, and the hinged transparent tempered glass side panel is easy to remove without any tools. Cable management system: 2 wire combs are included behind the motherboard tray to aid in cable management and keep your case more cleaner.
Controller equipped: with 5v 3pin addressable rgb and 12v 4pin pwm interface, it can be connected to synchronize RGB lighting and PWM of fans.
Note: only with the white pWM port connected, can other PWM ports sync PWM features. Better cooling airflow: support up to 6pcs fans at the same time, It also has room for 240mm/360mm water cooler. Pre-installed 3pcs argb/pwm fans: the case pre-installed 3pcs 120mm ARGB and PWM fans in the front, which provides your case the great airflow cooling and colorful lights.
Sufficient internal space: compatible with atx, you can install gpu horizontally and vertically with a vga holder, Mini-ATX motherboard. Multi-functional i/o panel: usb3. 0/2x usb2. 0/hd audio/reset/POWER. It provides a great airflow and keeps your case cooling all the time.