As an Amazon Associate I earn from qualifying purchases.
TP-Link #ad - Plug and play installationEasy setup with no software installation or configuration needed. Convert non-poe to poewith no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of TL-PoE150S.
802. 3af poe compliant tl-poe150s supplies power and data via one single ethernet cable to 802. 3af poe devices and expands network to areas with no power lines or outlets. High speed gigabit portsexperience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port + 1× Gigabit Ethernet Output port.
iCreatin #ad - Includes 12v 12watt power adapter UL listed power for the injector. Use with 12v ip security camera, wireless access point and other 12V devices. Support 10@mbps network device, Transforms Non PoE devices to PoE enabled.
REVOTECH #ad - Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection. 1500v high voltage isolation. 12v 2a power output, easy to access Poe network for non-PoE terminal.
Zopsc #ad - Apply for IEEE802. 3af/at standard POE powered devices. Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.
Tip: the power voltage should not be over DC48V. This poe injector is compatible with ieee802. 3af/at network devices. Made of plastic material, sturdy and durable to use. This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.
JacobsParts #ad - Ethernet pin usage: data: 1, -7, 3, 2, 5, 6 power: +4, 8 • Dimension: 3¼" x 1¾" x 1½". Plugs into a standard 120v wall outlet • Works with standard Cat5, Cat5e, or Cat6 Ethernet cable. 2 rj45 connectors: standard ethernet data input, Passive 802.
PROCET PoE System #ad - Low power devices receive only the power they need. Convert existing battery 12-55 volt power sources to PoE for use with Power over Ethernet IP Cameras, IP Phones, Base station Radios and WiFi access points.
Poe port 6kv surge protection, over current, protect output against over voltage, short circuit. Support transmission rate at 10/100/1000Mbps, effective distance is 100meters（328ft）. Industrial-scale, boost poe, temperature rating of -40 to 75 degrees celsius.
LINOVISION #ad - Non-stop poe supply with dual power input: Support 2 channel DC12V-48V redundant power inputs and auto failover, ensure high reliability networking system. Applications: standard poe supply in solar power system dc12v/dc18V/DC36V input, RV/Vehicle/Truck/Bus DC12V input, VoIP/Access control systems DC24V input.
Worry free purchae: enjoy 2 years warranty and Lifetime 24hr Global + US Local Tech Support; 30 Days Money Back Guarantee.
5-port full gigabit poe switch: provide 4 ieee802. 3af/at 30w poe ports and 1 gigabit uplink; all ports 10/100/1000mbps self-adaptive full duplex; Total POE budget 120W DC24V/DC48V input or 60W DC12V input. Dc12v-48v poe switch: support dc12v-48v input and standard iEEE802. 3af/at poe output with built-in voltage booster.
E-link #ad - Buy now and start enjoying our 30-Days money back and an 18-monoths replacement warranty and lifetime technical support. It’s widely used in wireless AP / CCTV security transmission / IP phone etc. The operation temperature is -40℃ to 80℃ -40℉ to 176℉. As you know, this poe injector can use 12v or 24v input and boost to 48v poe output, so you no longer need to consider the voltage of the powered device, most low voltage DC power supply system only has 12V or 24V power supply rather then 48V, it becomes more convenient.
1
Worry-free warranty : you will get 1 x poe injector and 1 x user manual. Wide installation methods: the poe injector supports 10/100/1000 base-t gigabit network and also has Din-Rail and Wall-Mount installation methods. 6kv lightning protection : our poe injector adopts surge protection design and makes it can be used in harsh environment and can survive from lightning strikes up to 6KV. It has high bandwidth and can support 4K/8K camera transmission.
The input voltage must be between 9VDC and 36VDC. The units have power output of 24W.
GeeekPi #ad - Only support [email protected] network;1 pair:b08XLQ42GV;2Pairs:B08XLXT8GB. Poe injector and splitter kit with 2. 1x5. 5 mm dc jack / plug, allows use of any DC voltage up to 57V. Connector type: 2.
1. TP-Link
#adUp to 15.4W | Plug & Play | Distance Up to 100 meters 328 ft. | Black TL-PoE150S, TP-LINK 802.3af Gigabit PoE Injector | Convert Non-PoE to PoE Adapter | Auto Detects the Required Power
#ad802. 3af poe compliant tl-poe150s supplies power and data via one single ethernet cable to 802. 3af poe devices and expands network to areas with no power lines or outlets. High speed gigabit portsexperience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port + 1× Gigabit Ethernet Output port.
More information #ad
Long range transmissiondeliver power up to 100 meters 328ft. Perfect for iP cameras or access point deployment in large areas. Auto detect powerwith auto detect technology, TL-PoE150S determines and delivers the exact power supply to your devices wiith up to 15. 4w power output.| Brand | TP-Link #ad |
| Manufacturer | TP-Link #ad |
| Height | 6.61 Inches |
| Length | 8.15 Inches |
| Weight | 0.66 Pounds |
| Width | 2.68 Inches |
| Part Number | TL-POE150S |
| Model | TL-POE150S |
| Warranty | 2 year - parts & labor |
More information #ad
2. iCreatin
#adExtension Power for 12 Volt 12 watt Devices with 5.5x2.1 mm DC Jack, UL Listed iCreatin 12V Power Over ethernet PoE Injector and PoE Splitter kit
#adMore information #ad
For more ports items, please check our other amazon listings. 12 volt power up to 30m/100ft via Ethernet, both data and power share the same cable.| Brand | iCreatin #ad |
| Manufacturer | iCreatin #ad |
| Height | 2.3 Inches |
| Length | 5 Inches |
| Weight | 0.4 Pounds |
| Width | 3.6 Inches |
| Part Number | 8541553610 |
| Model | 8541553610 |
| Warranty | 1 year |
More information #ad
3. REVOTECH
#adGigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5x2.1mm DC Plug CablePS5712TG
#adMore information #ad
Support international standard ieee802. 3 af & ieee802. 3at30w; poe port support 10/100/1000mbps data transmission. Transfer rate: 10/100/1000Mbps, IEEE 802. 3 x, standard: IEEE 802. 3 i, ieee 802. 3 u, ieee 802. 3 af/at. Pd support 44v-57v voltage transmission, Automatically detects power supply from PSE power supply module.| Brand | REVOTECH #ad |
| Manufacturer | Revotech #ad |
| Height | 0.91 Inches |
| Length | 10.83 Inches |
| Weight | 0.22 Pounds |
| Width | 1.1 Inches |
| Part Number | PS5712TG |
| Model | PS5712TG |
| Warranty | one year warranty |
More information #ad
4. Zopsc
#adPoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device
#adTip: the power voltage should not be over DC48V. This poe injector is compatible with ieee802. 3af/at network devices. Made of plastic material, sturdy and durable to use. This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.
More information #ad
3af/at, the same time your powered device must support poe pin 4/5+, 7/8- midspan. This non standard passive poe injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable. Conform to international safety product standards and is safe to use.| Brand | Zopsc #ad |
| Manufacturer | Zopsc #ad |
| Height | 0.39 Inches |
| Length | 0.39 Inches |
| Weight | 0.22 Pounds |
| Width | 0.39 Inches |
| Part Number | Zopsc93ics1gxow |
More information #ad
5. JacobsParts
#adJacobsParts 12V 2A 24W 802.3af Passive PoE Injector Power Over Ethernet Adapter for IP Cameras Phones WLAN AP
#adMore information #ad
3af mode b output 100Mbps Ethernet data + always on power. Simplify the installation of a wlan ap, ip Camera, IP phone, or any other 802.3af passive POE capable device. Inject power into an Ethernet cable in order to provide both power and data over a single cable.| Brand | JacobsParts #ad |
| Manufacturer | JacobsParts #ad |
| Part Number | POEINJ-A |
| Model | POEINJ-A |
More information #ad
6. PROCET PoE System
#adIEEE802.3af,802.3at,PoE++, Procet Industrial Gigabit DIN Rail 12~55V DC Input High Power Over Ethernet PoE Injector Adapter 95W 55V with Wide Temperature and 6KV Surge Protection Metal case
#adPoe port 6kv surge protection, over current, protect output against over voltage, short circuit. Support transmission rate at 10/100/1000Mbps, effective distance is 100meters（328ft）. Industrial-scale, boost poe, temperature rating of -40 to 75 degrees celsius.
More information #ad
Works with your existing power source - solar, can be used to power 802. 3af/at/poe++ up to 95 watts devices from a 12 volt to 55 volt DC input, you will instantly get 55V PoE on the output. Equipped standard dIN rail mounting bracket, after covered with waterproof case for outdoor use. Build-in detecting chip inside, which will Auto-negotiating IEEE802. 3af/at/poe++ pds, no worry about powering a non-PoE device.| Brand | PROCET PoE System #ad |
| Manufacturer | Beijing Creative Lianjie Network Technology Co.,Ltd #ad |
| Height | 15.6 Inches |
| Length | 54 Inches |
| Width | 36 Inches |
| Part Number | PTPSE105GWE |
| Model | PT-PSE105GWH-E |
| Warranty | Manufacturer warranty for 5 years from date of purchase |
More information #ad
7. LINOVISION
#adCompact POE Power for Solar Power/RV Truck/VoIP Systems, LINOVISION Industrial 5 Ports Gigabit Solar POE Switch with DC12V-48V to DC48V Voltage Booster,4 x IEEE802.3af/at 30W POE Ports @120W, IP40
#adWorry free purchae: enjoy 2 years warranty and Lifetime 24hr Global + US Local Tech Support; 30 Days Money Back Guarantee.
More information #ad
Only mode b POE output is supported. Industrial design: compact ip40 rugged metal enclosure; Wide working temperature -40 ℉ to 176 ℉; Support DIN-Rail & Wall Mount. 5-port full gigabit poe switch: provide 4 ieee802. 3af/at 30w poe ports and 1 gigabit uplink; all ports 10/100/1000mbps self-adaptive full duplex; Total POE budget 120W DC24V/DC48V input or 60W DC12V input. Dc12v-48v poe switch: support dc12v-48v input and standard iEEE802. 3af/at poe output with built-in voltage booster.
| Brand | LINOVISION #ad |
| Manufacturer | LINOVISION #ad |
| Height | 1.14 Inches |
| Length | 3.74 Inches |
| Width | 2.75 Inches |
| Part Number | B09HGWLZSD |
| Warranty | 2 Years Warranty and Lifetime 24hr Global + US Local Tech Support |
More information #ad
8. E-link
#adE-link Hardened Industrial Gigabit PoE+ Injector, Din-Rail and Wall-Mount Installation, 12~48V Input PoE+ Adapter, IEEE802.3af/at 30W Output up to 328ft
#ad1
More information #ad
12~48vdc power input : the industrial grade poe injector supports wide voltage input and makes it more applicable. Safe to use : the poe adapter uses the ieee802. 3 af/at poe standard, suitable for both 802. 3af/at equipment and it has pd detection function, it won’t burn the non-PoE devices when you connect them by mistake. Worry-free warranty : you will get 1 x poe injector and 1 x user manual. Wide installation methods: the poe injector supports 10/100/1000 base-t gigabit network and also has Din-Rail and Wall-Mount installation methods. 6kv lightning protection : our poe injector adopts surge protection design and makes it can be used in harsh environment and can survive from lightning strikes up to 6KV. It has high bandwidth and can support 4K/8K camera transmission.
| Brand | E-link #ad |
| Manufacturer | E-link #ad |
| Height | 11.4 Inches |
| Length | 37.4 Inches |
| Width | 26.77 Inches |
| Part Number | PoE-LNK-INJ301-fba |
| Model | PoE-LNK-INJ301-fba |
| Warranty | 3 YEARS |
More information #ad
9. Tycon Power Systems
#adTycon Systems TP-DCDC-1248 48V POE Out 24W DC to DC Converter and POE Inserter
#adTycon Power Systems #ad - Various protections for surge, short circuit and overload. The tp-dcdc-1248 dc to dc converters offered by tycon power systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a 12 or 24V battery system.The input voltage must be between 9VDC and 36VDC. The units have power output of 24W.
More information #ad
They have an integrated poe injector to apply the regulated 48VDC to the CAT5 Ethernet cable. Applications: 2v / 24v battery systems; wireless Access Points and Client Devices; IP Phone and Security Camera Systems. They accept data-in to a shielded rJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack.| Brand | Tycon Power Systems #ad |
| Manufacturer | Tycon Power Systems #ad |
| Height | 2 Inches |
| Length | 5 Inches |
| Weight | 0.28 Pounds |
| Width | 3 Inches |
| Part Number | TP-DCDC-1248 |
| Model | TP-DCDC-1248 |
More information #ad
10. GeeekPi
#adGeeekPi Passive PoE Injector and Splitter Power Over Ethernet Kit with 5.5 x 2.1 mm DC Power Adaptor Connector 5 Pair
#adMore information #ad
1mm x 5. 5mm, rj45 female; passive poe adaptor: 30m/98ft;rated voltage:12Vdc, RJ45 Male, Rated Current :1.5ampsthe best will be 1. 0a or so for long term use. Transforms non poe devices to PoE enabled;Use with IP security camera and other devices.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
More information #ad
