As an Amazon Associate I earn from qualifying purchases.



Since the mainboard can only receive one rotation speed signal, but no speed signal. For both 4-pin and 3-pin fans. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Please note 4pin fan speed can be adjusted by temperature control.
You can connect to the CPU fan lead on the system board or the chassis fan lead. Red is expected to be a pass through for the cpu fan. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function.


Save spacesinloon pc 8 channels fan hub the governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space. Knob adjusthigh accuracy and good performance, equipped with an independent speed controller and the speed can be adjusted at will.



Custom fan curve profiles: create custom fan curve profiles via Razer Synapse and have your case fans automatically adjust their speeds based on system temperature including the ability to run at zero RPM for total silence.
1. DEEP COOL
#ad
Occupying only One 4-pin Motherboard Header, DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM
#adDEEP COOL #ad - They will run at FULL SPEED. That is, all pwm fans will run at the same DUTY RATIO. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. Capable of connecting to 10 PC fans simultaneously for cooling the computer system.More information #ad
Velcro and screw mountings applicable for the tower interiors. Powered by a stable sata connection to the system PSU for up to 10 fans. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time. Only speed of Fan 1 can be identified by the system.Brand | DEEP COOL #ad |
Manufacturer | DEEPCOOL #ad |
Height | 1.18 Inches |
Length | 8.39 Inches |
Width | 4.41 Inches |
Part Number | FH-10 |
Model | DEEP COOL |
More information #ad
2. Thermaltake
#ad
Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1
#adThermaltake #ad - Blue led power Indicator. Included ties/velcro for easy placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place.More information #ad
Direct sata power input: powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use. Supports 10 4-pin independent fans :capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis.Brand | Thermaltake #ad |
Manufacturer | Thermaltake USA Direct #ad |
Height | 0.7 Inches |
Length | 3.2 Inches |
Weight | 0.1 Pounds |
Width | 1.7 Inches |
Part Number | AC-023-AN1NAN-A1 |
Model | AC-023-AN1NAN-A1 |
Warranty | 1 year warranty |
More information #ad
3. Noctua
#ad
Noctua NA-FC1, 4-Pin PWM Fan Controller Black
#adNoctua #ad - 6-year manufacturer’s warranty. Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctua’s industrialPPC series.More information #ad
Compact, highly flexible controller for 4-pin PWM fans. No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors. Includes a 3-way splitter cable for controlling up to 3 fans simultaneously.Brand | Noctua #ad |
Manufacturer | Noctua #ad |
Height | 0.98 Inches |
Length | 1.89 Inches |
Weight | 0.11 Pounds |
Width | 0.83 Inches |
Part Number | NA-FC1 |
Model | NA-FC1 |
Warranty | 6 year manufacturer’s warranty |
More information #ad
4. ELECTOP
#ad
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
#adELECTOP #ad - If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces.Since the mainboard can only receive one rotation speed signal, but no speed signal. For both 4-pin and 3-pin fans. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Please note 4pin fan speed can be adjusted by temperature control.
More information #ad
Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. So, then the speed is regulated by the speed for the "source" fan. The ten fans will spin at the same speed, the hub has a power source fed from the computer power supply, that designated by the system for that fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. Red is expected to be a pass through for the cpu fan. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function.
Brand | ELECTOP #ad |
Manufacturer | Electop #ad |
Part Number | CPUCOOL-1-10-4P |
Model | 4328444952 |
More information #ad
5. 1 one enjoy
#ad
Support 10 Computer CPU Fans Splitter PWM, 1 one enjoy Thermalright PWM Fan Hub PC Case Fan Controller 4 Pin
#ad1 one enjoy #ad - Stable sata power input: simple and stable. 10-port fan hub: supports 10 pwm 4 pin fans at the same time. Easy to install: double-sided adhesive for easy installation and more stable standing in the surface.More information #ad
Pwm function: each port has its own pwm function and the fan speed can be adjusted at the same time. Only one saTA connection to the system. Only the speed of the red port can be identified by the system. Compact design can save space and make the wire more tidy.Brand | 1 one enjoy #ad |
Manufacturer | 1 one enjoy #ad |
Part Number | FANHUB-PWM |
More information #ad
6. SinLoon
#ad
SinLoon PC 8 Channels Fan Hub Knob Cooling Fan Speed Controller for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control- SATA Interface Power Supply SATA 1Knob
#adSinLoon #ad - Functionpc 8 channels fan hub reduce speed to reduce noise & power consumption when computer parts are free. Increase speed to reduce computer part temperature when computer parts are busy.Save spacesinloon pc 8 channels fan hub the governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space. Knob adjusthigh accuracy and good performance, equipped with an independent speed controller and the speed can be adjusted at will.
More information #ad
Adjustment method: 1 Manual Adjustment Knob. Universalwidely used for pc computer water cooling system, easy to install. Fan interface: 4piN 3PIN Can be connected. Power supply Interface: SATA interface. Material knob cooling fan speed Controller adopts plastic and metal materials, durable, reliable, with low loss and low heat.Brand | SinLoon #ad |
Manufacturer | mandyyan #ad |
Part Number | 11 |
More information #ad
7. icepc
#ad
Icepc PC 8 Channels Fan Hub 4 Knob Cooling Fan Speed Controller for CPU Case HDD Vga Pwm Fan Pci Bracket Power by 12V Fan Consata Interface
#adicepc #ad - This cooling fan hub is equipped with the independent speed controller. Cooling fan speed controller only, other accessories demo in the picture is not included.More information #ad
Professional high speed regulating circuit, high performance, support for SATA interface. Mini size, suitable for more types of computer chassis. Made of high-quality material, durable, firm and stable.Brand | icepc #ad |
Manufacturer | icepc #ad |
Part Number | ICEPC0015-1 |
Model | ICEPC0015-1 |
More information #ad
8. DEEP COOL
#ad
DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04
#adDEEP COOL #ad - Compatible with 3-pin/4-pin fans. Double-sided adhesive Installation. Support Cable management. Support PWM function. 4-port fan hub.More information #ad
Brand | DEEP COOL #ad |
Manufacturer | Deepcool #ad |
Height | 3.4 Inches |
Length | 2.5 Inches |
Weight | 0.1 Pounds |
Width | 1 Inches |
Part Number | FH-04 |
Model | FH-04 |
Warranty | 1 Year |
More information #ad
9. Razer
#ad
Thin Profile, Convenient Fan Monitoring, Razer PWM PC Fan Controller: Connects Up to 8 Fans, Custom Fan Curve Profiles
#adRazer #ad - Thin profile: the razer pwm fan controller features a low-profile design and adhesive backing making it easy to install in tight spaces within your PC case.Custom fan curve profiles: create custom fan curve profiles via Razer Synapse and have your case fans automatically adjust their speeds based on system temperature including the ability to run at zero RPM for total silence.
More information #ad
Convenient fan monitoring: Keep track and adjust fan speeds all from a single intuitive interface with the Razer Synapse software. Connects with up to 8 fans: designed to provide voltage and PWM control for up to 8 fans, the Razer PWM Fan controller supports a diverse range of PC build requirements.Brand | Razer #ad |
Manufacturer | Razer Inc. #ad |
Part Number | RZ34-02140700-R3M1 |
Model | RZ34-02140700-R3M1 |
Warranty | 2 year manufacturer |
More information #ad